Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 111 / 454

deny .*
AS Path Access List 4:
permit _109$
deny .*
AS Path Access List 10:
deny _109$
permit ^108_
deny .*
■
See show ip as-path-access-list
show ip community-list
Use to display routes that are permitted by a BGP community list.
■
■
Example
host1# show ip community-list
Community List 1:
permit 752877569 (11488:1)
permit 752877570 (11488:2)
permit 752877571 (11488:3)
permit 752877572 (11488:4)
Community List 2:
permit 4294967043 (local-as)
■
See show ip community-list
show ip forwarding-table slot
■
Use to display details on the forwarding table for a specific line module, including
the memory used by each virtual router configured on the line module and free
memory available on the module.
■
The Load Errors field records any failed routing table distribution attempt as an
error. Attempts can fail for many reasons during normal operation; a failed
attempt does not necessarily indicate a problem. It is normal to see many Load
Errors per day.
■
If the Status field does not indicate Valid, then the routing table distribution has
failed constantly for that VR. It is normal and appropriate behavior for the Status
field to indicate Valid while the Load Error field increases daily.
■
Field descriptions
■
Free Memory—Amount of routing table memory free on the line module,
in kilobytes
■
Virtual Router—Name of the virtual routers configured on the line module
■
Memory (KB)—Amount of routing table memory consumed by the virtual
router, in kilobytes
■
Load Errors—Count of errors made while loading the routing table on the
line module
■
Status—Whether the routing table for the virtual router is valid
■
Example
Monitoring IP
■ 87
Chapter 1: Configuring IP