manualshive.com logo in svg

Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Конфигурационное руководство Juniper IGP - CONFIGURATION GUIDE V11.1.X предоставляет подробное руководство по настройке продукта. Скачайте бесплатно руководство на русском языке с manualshive.com. Получите все необходимые рекомендации и инструкции для успешной настройки вашего устройства.

Поделиться
Скачать
background image

dead-interval command.............................................294
debounce-time command..........................................210
debug commands..............................................230, 300

debug ip ospf......................................................300
debug ip rip........................................................230
debug isis............................................................388

debug-related information, IS-IS.........................388, 397
default routes

cost, OSPF..........................................................267
IP routing..............................................................36
IS-IS routing........................................................367
OSPF routing......................................................283
suppressing IS-IS.................................................367

default-information originate command

IS-IS....................................................................367
OSPF...................................................................283
RIP......................................................................210

default-metric command............................................215
description

adding to IP interfaces..........................................47
adding to IPv6 interfaces....................................143

DHCPv6 Prefix Delegation

IPv6 local address pools and

baseline ipv6 local pool command...............154
setting a baseline.........................................154
show ipv6 local pool command...................172
viewing parameters.....................................172

directed broadcast packets...........................................23
directed broadcasts, enabling.......................................24
directly connected networks......................................205
disable command......................................................215
disable-dynamic-redistribute command

IS-IS....................................................................359
OSPF...................................................................283
RIP......................................................................210

disable-incremental-external-spf command...............299
distance commands...................................................210

distance................................................................28
distance ip..........................................................366
distance ospf.......................................................283

distance, RIP administrative.......................................210
distribute-domain-wide command.............................364
distribute-list command.....................................216, 227
documentation set

comments on.....................................................xxiii

domain, OSPF............................................................243
domain-authentication command..............................359
domain-authentication-key command........................358
domain-message-digest-key command..............330, 358
domain-wide prefix distribution.................................364
dropped packets, troubleshooting................................88
DRs (designated routers)

IS-IS routing........................................................346
OSPF routing......................................................243

dynamic hostname resolution, IS-IS...........................377

dynamic route redistribution, disabling

in IS-IS................................................................359
in OSPF...............................................................283
in RIP..................................................................210

E

E Series routers

IP features..............................................................7
IPv6 features.......................................................125
IS-IS features.......................................................340

ECMP (equal-cost multipath)

IP..................................................................49, 150
IS-IS............................................................333, 377
OSPF...................................................248, 283, 291
RIP..............................................................207, 210

end system. 

See 

 ES

entry, routing table......................................................26
equal-cost multipath. 

See 

 ECMP

ES (end system)

hello packet rate.................................................374
neighbor information..........................................408

Ethernet commands, interface fastEthernet.................36
Ethernet controllers........................................................7
exit-address-family command....................................345
exit-remote-neighbor command.................................227
exponential back-off SPF calculation, IS-IS.................374
external routes, OSPF................................................247

F

fabric congestion..........................................................88
flooded broadcast packets............................................23
flooding......................................................................243
forwarding table...........................................................25
fragmenting IP datagrams........................................4, 24
frequency command....................................................67
full spf, IS-IS...............................................................374
full-spf-always command...........................................374

G

gateways........................................................................4
global default metric, IS-IS.........................................364
global IP routing table..................................................25
graceful restart, IS-IS

commands. 

See 

 nsf commands

configuring..........................................................379
monitoring..................................................397, 408
overview.............................................................333
timers.........................................................333, 381

group (multicast) addressing..........................................9

H

hash functions............................................................272

Index

■

419

Index

Содержание IGP - CONFIGURATION GUIDE V11.1.X







































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IGP - CONFIGURATION GUIDE V11.1.X

Garmin 010-10307-00 - MapSource Fishing Hot Spots Manual Do Usuário preview
010-10307-00 - MapSource Fishing Hot Spots
Бренд: Garmin Страницы: 30
M-Audio NRV10 User Manual preview
NRV10
Бренд: M-Audio Страницы: 32
Teklynx Form Designer User Manual preview
Form Designer
Бренд: Teklynx Страницы: 30
Adobe FRAMEMAKER 6.0 Manual preview
FRAMEMAKER 6.0
Бренд: Adobe Страницы: 323
Red Hat APPLICATION STACK 2.2 RELEASE Release Note preview
APPLICATION STACK 2.2 RELEASE
Бренд: Red Hat Страницы: 22
TechSmith Morae 3 Manual preview
Morae 3
Бренд: TechSmith Страницы: 108
Intel B75TM-ITX Overview preview
B75TM-ITX
Бренд: Intel Страницы: 19
Yamaha RS7000 Ver.1.2 Addendum preview
RS7000 Ver.1.2
Бренд: Yamaha Страницы: 4
MACROMEDIA BREEZE-FOR MEETING PARTICIPANTS Manual preview
BREEZE-FOR MEETING PARTICIPANTS
Бренд: MACROMEDIA Страницы: 30
Tascam HS-8 Software Manual preview
HS-8
Бренд: Tascam Страницы: 13
Fellowes MediaFACE 4.01 User Manual preview
MediaFACE 4.01
Бренд: Fellowes Страницы: 170
GE v6 User Manual preview
v6
Бренд: GE Страницы: 269
Adobe 65009626 - Soundbooth CS4 - PC Using Manual preview
65009626 - Soundbooth CS4 - PC
Бренд: Adobe Страницы: 102
Magellan Maestro 4350 - Automotive GPS Receiver User Manual preview
Maestro 4350 - Automotive GPS Receiver
Бренд: Magellan Страницы: 9
Olympus Auto-Connect Connection Manual preview
Auto-Connect
Бренд: Olympus Страницы: 9
Oki OF5650 User Manual preview
OF5650
Бренд: Oki Страницы: 69
AVIRA ANTIVIR SHAREPOINT User Manual preview
ANTIVIR SHAREPOINT
Бренд: AVIRA Страницы: 25
MACROMEDIA BREEZE-CLUSTERING BREEZE PRESENTATION... Manual preview
BREEZE-CLUSTERING BREEZE PRESENTATION...
Бренд: MACROMEDIA Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды