Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 51 / 454

Table 3: Routing Table for Router NY
Metric
Administrative
Distance Route
Type Next-Hop
Router Destination
Network
0 0 connected 10.1.0.1 10.1.0.0/16
10 110 OSPF 10.5.0.3 10.2.0.0/16
10 115 IS-IS 10.5.0.3 10.2.0.0/16
15 20 EBGP 10.5.0.3 10.2.0.0/16
5 120 RIP 10.5.0.3 10.2.0.0/16
0 0 connected 10.5.0.2 10.5.0.0/30
Table 4: Routing Table for Router LA
Metric
Administrative
Distance Route
Type Next-Hop
Router Destination
Network
0 1 static 10.5.0.2 10.1.0.0/16
10 110 OSPF 10.5.0.2 10.1.0.0/16
4 120 RIP 10.5.0.2 10.1.0.0/16
0 0 connected 10.2.0.1 10.2.0.0/16
0 0 connected 10.5.0.3 10.5.0.0/30
Setting the Administrative Distance for a Route
The administrative distance is an integer that is associated with each route known
to a router. The distance represents how reliable the source of the route is considered
to be. A lower value is preferred over a higher value. An administrative distance of
255 indicates no confidence in the source; routes with this distance are not installed
in the routing table.
Table 5 on page 27 lists the default distance for each type of source from which a
route can be learned.
Table 5: Default Administrative Distances for Route Sources
Default Distance Route Source
0 Connected interface
1 Static route
IP Routing
■ 27
Chapter 1: Configuring IP