Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 209 / 454

■
retransmitted pkts—Number of packets retransmitted
■
retransmitted bytes—Number of bytes retransmitted
■
Global Diagnostic Data Unknown Connection log—Includes the following
global statistics:
■
Source address/port – local port—Shows the 32 most recent TCP
connection attempts that were rejected, including the remote node’s IP
or IPv6 address and port, the local port for the connection attempt, and
the number of identical attempts that have been received on that port
in a row. The reason for rejection is not given. This information may be
useful in tracking down DoS attacks.
■
# connection-reqs rejected—Total number of connection attempts that
have been rejected
■
# connection-reqs pending—Current number of connection attempts
that are pending, awaiting additional data from the peer
■
# sonewconn calls that fail—Number of calls to sonewconn that have
failed. This statistic often indicates that either a socket connection limit
has been reached or that there was no memory to hold the socket data
structures.
■
TCP Session Statistics
■
Local addr—Local address of the TCP connection
■
Local port—Local port number of the TCP connection
■
Remote addr—Remote address of the TCP connection
■
Remote port—Remote port number of the TCP connection
■
State—Current state of the TCP connection
■
Authentication—Authentication status of the TCP connection
■
TCP Session Statistics Sent:
■
total pkts—Total number of packets sent on the TCP connection
■
data pkts—Number of data packets sent on the TCP connection
■
bytes—Number of bytes sent on the TCP connection
■
retransmitted pkts—Number of packets retransmitted on the TCP
connection
■
retransmitted bytes—Number of bytes retransmitted on the TCP
connection
■
TCP Session Statistics Rcvd:
■
total pkts—Total number of packets received on the TCP connection
■
in-sequence pkts—Number of packets received in sequence on the TCP
connection
Monitoring IPv6
■ 185
Chapter 2: Configuring IPv6