Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 97 / 454

■
Use to schedule the test’s length.
■
Life is a value that depends on the type of the RTR entry; it is not a length of
time.
■
If the type is echo, life relates to the number of probes sent until a test
finishes.
■
If the type is pathEcho, life relates to the maximum number of hops used
by the traceRoute trap.
■
Example
host1(config)# rtr schedule 5 life 1800
■
Use the no version to stop the test. The no version stops the probe operation by
putting it in the pending state. The no version also resets the life attribute.
■
See rtr schedule life
rtr schedule restart-time
■
Use to specify a restart time, in seconds, after which a test is restarted.
■
Example
host1(config)# rtr schedule 5 restart-time 15
■
Use the no version to stop the test. The no version stops the probe operation by
putting it in the pending state. The no version also resets the restart-time attribute.
■
See rtr schedule restart-time
rtr schedule start-time
■
Use to schedule a test’s starting time (now or pending).
■
Example
host1(config)# rtr schedule 5 start-time now
■
Use the no version to stop the test. The no version stops the probe operation by
putting it in the default state, pending.
■
See rtr schedule start-time
Shutting Down the Probe
You can shut down the RTR probe operation.
rtr reset
Response Time Reporter
■ 73
Chapter 1: Configuring IP