Juniper IGP - CONFIGURATION GUIDE V11.1.X, Руководство по настройке

Страница: 419 / 454

■
Use to display the last record flooded from MPLS.
■
Field descriptions
■
System ID—Name or system ID of the MPLS tail-end (destination) router
■
Router ID—Router ID for the router
■
Link Count—Number of links that MPLS advertises
■
Neighbor System ID—Identifier of the remote system in an area
■
Administrative group—TLV administrative group or color assigned to the
link
■
Interface IP address—IP address of the interface
■
Neighbor IP Address—IP address of the neighbor
■
Maximum link bandwidth—Bandwidth capacity of the link in bits per second
■
Reservable link bandwidth—Amount of bandwidth reservable on the link
(whether reserved or not)
■
Unreserved bandwidth—Amount of bandwidth available for reservation on
the link
■
TE default metric—Traffic engineering default metric value
■
Affinity Bits—Attributes flooded for the link
■
Example
host1# show isis mpls advertisements
System ID: zion.00
Router ID: 222.9.1.1
Link[1]
Neighbor System ID: london.00
Administrative group: 0
IPv4 Interface Address: 221.1.1.1
IPv4 Neighbor Address: 221.1.1.2
Maximum link bandwidth: 50000
Reservable link bandwidth: 50000
Unreserved bandwidth:
Priority 0: 50000
Priority 1: 50000
Priority 2: 50000
Priority 3: 50000
Priority 4: 30000
Priority 5: 30000
Priority 6: 30000
Priority 7: 30000
TE default metric: 0
Link[2]
Neighbor System ID: london.00
Administrative group: 0
IPv4 Interface Address: 221.1.6.1
IPv4 Neighbor Address: 221.1.6.2
Maximum link bandwidth: 50000
Reservable link bandwidth: 50000
Unreserved bandwidth:
Monitoring IS-IS
■ 395
Chapter 6: Configuring IS-IS