manualshive.com logo in svg
background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco MDS 9000 Family Release Notes 
for Cisco MDS NX-OS Release 5.0(4b)

Release Date: January 13, 2011

Part Number: OL-21012-04 B0

This document describes the caveats and limitations for switches in the Cisco MDS 9000 Family. Use 
this document in conjunction with documents listed in the 

“Related Documentation” section on page 37

.

Note

As of Cisco Fabric Manager Release 4.2(1a), Fabric Manager information will no longer appear in the 
Cisco MDS 9000 Family Release Notes for NX-OS releases. Cisco Fabric Manager Release Notes will 
include information that is exclusive to Fabric Manager as a management tool for Cisco MDS 9000 
Family switches and Cisco Nexus 5000 Series switches. Refer to the following website for Release Notes 
for Cisco Fabric Manager:

http://www.cisco.com/en/US/partner/products/ps10495/prod_release_notes_list.html

Release notes are sometimes updated with new information on restrictions and caveats. Refer to the 
following website for the most recent version of the 

Cisco MDS 9000 Family Release Notes

http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.html

Table 1

 shows the on-line change history for this document.

Contents 

This document includes the following:

Introduction, page 2

Table 1

Online History Change

Revision

Date

Description

A0

01/132011

Created release notes.

B0

02/09/2011

Updated the 

“Licensed Cisco NX-OS Software Packages”

 

section.

Содержание MDS 9222i - Multiservice Modular Fabric Switch









































Отзывы: