Juice me 3, Руководство пользователя, Страница: 10 / 147

18
19 User Manual JUICE CHARGER me 3 [EP-JCME3*] V 1.02 User Manual JUICE CHARGER me 3 [EP-JCME3*] V 1.02
⚠
W A R N I N G
Failure to observe these warnings can lead to electric
shock or fire, or damage the charging equipment.
•
Only qualified, electrically skilled persons are permit -
ted to install and commission the JUICE CHARGER me
3. Such expert electricians bear full responsibility for
ensuring compliance with the existing codes, stand -
ards and regulations in force.
•
Do not immerse the charging equipment in water, and
do not directly expose it to water spray (e.g. from
high-pressure cleaners or garden hoses).
•
Never disconnect the JUICE CHARGER me 3 from the
vehicle when the charger is electrically live (i.e. during
charging operations), as this can lead to fouling of the
connector plug contacts, and damage the charging
electronics and electrical systems in your vehicle as
well as in the JUICE CHARGER me 3. Always stop the
charging process first at the controls inside the vehicle.
•
Do not expose your charging equipment to large
amounts of dust, highly humid or moist environments,
or aggressive liquids.
•
The JUICE CHARGER me 3 is intended for use in pri -
vate households and semi-public areas (e.g. on private
property or company parking lots, etc.).
•
During unattended charging operations, unauthorised
parties (e.g. children, under-age persons, household
pets or other animals) should not have access to the
charging equipment and vehicle.
•
The JUICE CHARGER me 3 can become hot if exposed
to direct sunlight. If this occurs, do not touch or take
hold of the device.
⚠
C A U T I O N
Failure to follow the instructions below can lead to
property damage, fines or even punishment.
•
The electrically skilled person installing the unit is
responsible for ensuring compliance with all local reg-
ulations governing the operation of charging stations.
•
The electrical connection data of the JUICE CHARGER
me 3 must match the data of the power supply grid.
•
Protect the plug connector against humidity and
moisture. Always keep it dry. Unplugged connectors
are not watertight. Always cover the plug connector
with the protective cap when not in use.
Always keep your charging equipment neat and
tidy.
Any loose charging cable lying around poses a trip hazard.
Any items left sitting on top of the device can become
hazardous falling objects.
•
Minimise any trip hazards.
•
Do not leave any objects sitting on top of the device.
•
Coil and hang the cable above the device, or ensure
if the cable is lying on the ground that it doesn’t lie
across any driveway or walkway. Prevent trip hazards,
also during charging operations.
Stow the charging equipment in a clean, dry place when
not in use. The charging cable must be neatly and proper -
ly coiled with no kinks or twists.
4. Symbol legend
(symbols that appear in this User Manual and/or on the charging equipment)
By using the CE marking, the manufacturer or distrib -
utor declares that the product meets all applicable
European regulations and standards (EU Declaration
of Conformity of the European Community).
By using the UK Conformity Assessed (UKCA)
marking, the manufacturer or distributor declares
that the product meets all applicable regulations and
standards of the United Kingdom (UK Declaration of
Conformity / UK Conformity Assessed).
RoHS
Products marked with this symbol meet the
requirements of the EU Directives restricting the
use of certain hazardous substances in electrical and
electronic equipment.
-30
This symbol indicates the lowest possible tempera-
ture (−30 °C) at which the device may be operated.
Danger of electrical shock from hazardous voltage if
used improperly.
The surface of the charging equipment can become
very hot if exposed to direct sunlight.
This symbol indicates general danger or hazard. Read
the User Manual to familiarise yourself with the
charging equipment.
I 67 P
This symbol indicates that this product’s protection
rating meets the requirements of Protection Class
IP67. This means that it is protected against dust and
temporary immersion.
PE PE
This symbol indicates that the earth conductor is
fixed and permanently connected.
This product meets the requirements of Protection
Class I in accordance with IEC Standard 61140 of the
International Electrotechnical Commission.
≤ 2000m
The charging equipment is suitable for operation up
to an elevation of 2,000 metres above sea level.
JUICE has planted a tree to compensate for the
carbon footprint caused by the manufacture and
transport of this device.
Read more at juice.world/forest
5. Scope of supply
Standard equipment:
•
JUICE CHARGER me 3
•
Type-2 holder
•
Two RFID cards
Parts:
1
JUICE CHARGER me 3
2
Vehicle connector for coupling to the vehicle
charging socket (Type 2)
3
Cable gland with bend protection
4
400-V, 32-A, 3-phase heavy-duty cable with
control signal conductors
5
Function display
6
Display (only for the version with MID-compliant
meter, EP-JCME3M)
EN
3
2
1
4
6
5
D
E
D
E
EN EN
FR FR
IT IT
ES ES
PT PT
N
L
N
L
DA DA
SV SV
NO NO
FI FI
EL EL
CS CS
H
U
H
U
PL PL
H
R
H
R
SR SR
SK SK
SL SL
RO RO
BG BG
TR TR
RU RU
UK UK
H
E
H
E
AR AR
EN EN EN EN