JLL 2000 Series, Руководство пользователя

Страница: 35 / 72

6-10
•
The magnet DZO North 7 ½ should be placed 1 ½ inches below the drawn line.
The barcode will be glued later when the floor stops are properly adjusted.
•
Place the template's window on the line (see Fig. 8, 9 and 10).
NOTE: For the bottom landing, the cab cannot be lowered by 24 inches. We
recommend moving up the car and using the template. Otherwise, remove the
bracket from the top of the car, mount the magnetic reader and then use the
template later. Use pliers to prevent the reader from going down. Reattach the
magnetic reader on top of the car.
FIG. 8 FIG. 9 FIG. 10
▪
Place the DZO magnet in the space provided as shown above.
▪
Physically place the car even with the landing and ensure the magnet DZO is
centered between LU and LD. The DZO input and DZO1 are activated and the LU
and LD inputs must be off.
6.2.5. Barcode magnets installation
The barcode magnets are of North polarity and are 2¼ in long. Refer to Table 2 to
know which barcode magnet to stick at each landing.