28/55
The soft key can stop the current short-circuit correction test operation, and keep the original short
circuit correction data unchanged.
4)press to the short DCR of the soft key, JK2817N will measure the short circuit resistance of the
DC resistance function.
5)Press soft key ON , The short circuit correction is effective, and JK2817N will make short
circuit Correction calculation in the later test process.If frequency 1 and frequency 2 are set to
OFF, the short-circuit correction calculation uses the present frequency correction data calculated
by insertion method.If frequency 1 and frequency 2 are set to ON and the current test frequency
equals frequency 1 and frequency 2, the short-circuit correction data of frequency 1 and frequency
2 will be used for short-circuit correction calculation.
6)Press soft key OFF
，
Turn off the short-circuit correction function. No more short-circuit
correction calculation will be carried out in the future measurement process.
3.6 < limit table setting > page
Press menu key [SETP] and press the soft key [LMTSET] to enter the < limit table setting >
page.
Figure:
In this page, you can set the function of the instrument comparator. JK2817N can set the BIN limit
of 9 main parameters and the BIN limit value of a auxiliary parameter.The test results can be
sorted into up to 10 BIN (BIN1 to BIN9 and BIN OUT).If the principal parameters of the
measured part are within the limits of BIN1 to BIN9, but the auxiliary parameters are not within
the limits, then the measured part is sorted into the accessory BIN.The comparison function is
particularly useful when JK2817N installs the HANDLER interface and is used in the automatic
test sorting system.The limit parameters of the following comparison functions can only be set in
< limit list setting > page.
●Test parameters (parameters)
●Comparative functional limit mode(mode)
●Nominal value (nominal)
●Auxiliary BIN ON/OFF (affiliate)
Содержание JK2817N
Страница 1: ......
