Jinko JK2817N, Руководство пользователя

Страница: 32 / 57

30/55
the upper limit is not necessarily greater than the nominal value.The BIN limit ranges can be
discontinuous,can also have overlapping areas.
Comparison of functional limit mode setup steps
1)Move the cursor to the mode setting area, and the soft key area of the screen displays the
following soft keys.
●% TOL
The soft key is used to set the limit mode as follows: tolerance way of percentage deviation.
●ABS TOL
The soft key is used to set the limit mode as: absolute deviation tolerance mode.
●SEQ MODE
The soft key is used to set the limit mode: continuous mode.
●TWO ABS
2)Select the soft key and set the limit mode.
3.5.3 Tolerance mode nominal value setting
When the tolerance mode is chosen as the limit mode of the main parameter ， need to set the
nominal value.The nominal value can be set arbitrarily in the display range of the instrument.
When the continuous mode is chosen as the limit mode of the main parameter,can set the nominal
value.but it is not necessary to use the nominal value in continuous mode.
Nominal value setting operation steps
1)Move the cursor to the nominal set field.
2)Enter the nominal value with the numeric key. When the data is entered, the nominal value can
be entered with the soft key subscript (p, n,, m, k, M, *1).When entering the nominal value
according to the soft key *1, the nominal value selects F, H or Ω according to the main parameter
as the default unit.
3.5.4 Comparator function ON/OFF
JK2817N can set the BIN limit of 9 main parameters and the BIN limit value of a pair of
parameters.The test results can be sorted into up to 10 BIN (BIN1 to BIN9 and BIN OUT).If the
principal parameters of the measured part are within the limits of BIN1 to BIN9, but the auxiliary
parameters are not within the limits, then the measured part is sorted into the accessory BIN.The
comparison function is particularly useful when JK2817N installs the HANDLER interface and is
used in the automatic test sorting system,Comparative functions are particularly useful.
The comparator function ON/OFF sets the operation steps.
1)Move the cursor to the comparison setting area. The soft key area of the screen displays the
following soft keys.
ON
OFF
Use the soft key to set the comparison function to ON (ON) or OFF (OFF).