9/55
< data preservation >
Note: The data storage software is valid in the measurement display interface and the list scan
display interface. After inserting the U disk, press the data to save and the state becomes ON. The
data is saved to the CSV directory of the U disk. CSV format. When the data storage software is
pressed again, the state becomes OFF and the data is save finished.
This key automatically records the test data after inserting the U disk at the MEAS interface, and
saves the system settings in SYSTEM.
2.4.2 Parameter set the main menu button[SETUP]
When the function of the LCR Meter is used, it is used to enter the settings of each component test.
The functional pages of this part include:
< component test Settings >
< user correction >
< limit Settings >
< list Settings >
< System Settings >
2.4.3 System setup main menu button[SETUP]
For entering the system settings home page. Mainly on the system settings, file list function menu
start button. The functional pages of this part include:
< System Settings >
< System Settings >
< Default Settings >
< system reset >
2.5 basic operation
The basic operation of JK2817N is as follows:
Use menu key ([DISP], [SETUP]) and soft key to select the page you want to display.
Use cursor keys ([
口
][
口
] [
口
] [
口
]) to move the cursor to the domain you want to set.When
the cursor moves to a certain domain, the domain will be highlighted and displayed. The domain is
the cursor area that can be set.
The corresponding soft key function in the current cursor area will be displayed in the "soft key
area". Select and press the required soft keys, [←] keys, and data for data entry.
When a numeric key is pressed, the soft key area will display the unit soft key that can be used.
You can end the data entry by the unit soft key.
Содержание JK2817N
Страница 1: ......
