7/55
will not respond.(JK2817N and JK2832A no this function).When the measurement function is
DCR, Lp-Rd and Ls-Rd, the function is invalid.
⑻
PASS Indicator light
，
FAIL Indicator light
Test qualified PASS LED Instructions
，
Test failed FAIL LED Instructions
(9) USB HOST Interface
It is used to connect U disk memory, save and invoke files, copy and save data and so on.
⑽
[RESET] key
Press[RESET] key ,When the transformer is scanned automatically, the scan will be terminated.
Other page devices will not perform any operation.
⑾
[TRIGGER] key
When the trigger mode is set to MAN (manual) mode, the instrument can be triggered manually.
⑿
test terminal(UNKNOWN)
The four terminal test terminal is used to connect the four end test fixture or test cable to measure
the measured parts.
Current Motivating high end(Hcur)
；
Voltage sampling high end(Hpot)
；
Voltage sampling low end(Lpot)
；
Current Motivating low end(Lcur).
⒀
LCD liquid crystal display
480x272 Color TFT LCD display, display measurement results, measurement conditions, etc.
⒁
softkey
Five soft keys can be used to select control and parameters. Each soft key has a corresponding
function definition at the top. The definition of soft key varies with the display page.
⒂
POWER(POWER)
Power switch
2.2 Description of rear panel
Figure 2-2 gives a brief description of the JK2817N rear panel.
Figure 2-2. shows the rear panel
1.blowhole
2.Power socket (without fuse, fuse in instrument).
Содержание JK2817N
Страница 1: ......
