48/55
1+Qx
2
The accuracy of G can only be used when measuring combinations in G-B.
6.1.18 D accuracy
D accuracy De is given by the following
Ae
De =±100
The upper form is used only when Dx is ≤ 0.1.
When Dx>0.1, De should be multiplied by (1+Dx).
6.1.19 Q accuracy
Q accuracy is given by the following
Qe =± Qx*De
1μQx*De
Here,Qx is the value of the measured Q.
De is the accuracy of D.
Upper conditions of use Qx*De<1
6.1.20 θ accuracy
Θ accuracy is given by the following:
θe =(180divided by π) multiply by (Aedivided by100)
[deg]
6.1.21 G accuracy
When Dx (measured D value) ≤0.1
G accuracy is given by the following:
Ge = Bx* De
[S]
Bx = 2πfCx =1divided by2πfLx
Here,Bx is the value of the measured B [S].
Cx is the value of the measured C [F].
Lx is the value of the measured L [H].
De is the accuracy of D.
F is test frequency
The above G accuracy is used only in the combination of Cp-G and Lp-G.
6.1.22 Rp Accuracy
When Dx (measured D value) ≤0.1
Rp accuracy is given by the following:Rp =(Rpx* De) divided by(Dx*De)
[Ω]
Here,Rpx is the value of the measured Rp [S].
Содержание JK2817N
Страница 1: ......
