jablotron JA-101K Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 110

jablotron JA-101K Скачать руководство пользователя страница 50

JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels

50

/

110

MLJ51410

9.8

Control from the MyJABLOTRON web app

Remote control from the MyJABLOTRON web app is the most user-friendly way to control the security system

from any internet browser regardless of computer platform. Once logged in, the app enables you to control
the system not just from the virtual keypad of every physical keypad present in the system, but also enables you
to control all sections and PG outputs from an overall list. The user can also browse through a detailed event
history including taken photos. New photos can be taken immediately by a user’s request. Unlike with
the physical system, the user can see the current temperatures from thermometers, values from various meters
and configure messages notifying you about system events or exceeded user-set values.

You must authorize yourself with a user code every time you sign in to control the system. Setting sections

using segments is identical to their real setup. If the segments enable partial setting, it’ll be possible to partially
set the system remotely. In all other cases, controlling from the list will always set whole sections. For more info,
see chapter 15 MyJABLOTRON web application.

Part of remote programming from the website (regardless of the platform of the remote computer) is so called

WEB-Link, which is available in MyCOMPANY app

Æ

Installation management

Æ

Configuration button.

WEB-Link is available only for installer companies, which can use this tool to perform indirect remote access
by changing parameters in a configuration file located on the server and save it immediately, in a specific time
or after unsetting the system. The installation technician may be informed about a successful change
in configuration by SMS or e-mail.

9.9

Control via the MyJABLOTRON mobile app

Users of MyJABLOTRON can download an application for smart devices. Available for all platforms such

as  iOS,  Android  and  Windows  Phone.  The  mobile  app  is  the  most  user-friendly  way  to  control  the  security
system  which  the  user  can  even  carry  in  a  pocket  thanks  to  almost  unlimited  internet  access.  After  once
secured logging in, the app enables you to control the system not just from the virtual keypad of every physical
keypad present in the system, but also enables you to control all sections and PG outputs from an overall list.
So  almost  the  same  function  range  as  in  the  MyJABLOTRON  web  application.  For  some  platforms  it  offers
much more, for instance for iOS it is Touch ID instead of a code.

«
...
48
49
50
51
52
...
»

Содержание JA-101K















































































































Отзывы:

Нет отзывов