JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels
108
/
110
MLJ51410
16 System takeover by the user
When installation of the security system is finished it is generally recommended to create documentation
(report about handing over the system, security system LOG, etc.) where there will be all information about the
number and location of devices such as detectors, sirens, keypads, their segments and how they have been
configured. System users should be trained how to use the system according to following points:
1. Control from system keypad. Setting and unsetting of sections (from control segments, or from keypad
menu).
2. Ensure that exit / entrance time is adequate and also valid for garage doors or other entrance routes.
3. Explain what authorization is, what it is for and options like codes with and without prefixes, RFIS tags,
etc…
4. Partial setting at home. Difference in indication between partial and full setting.
5. Control of home automation using control segments and other functions (Panic, Fire, health troubles).
6. Triggering an alarm when the system is set included sirens, test of alarm call.
7. Explaining the difference between alarm cancelling by authorization and unsetting a section.
8. Section control (remotely via voice menu using cell phone keypad).
9. Section control and home automation (PG outputs) via SMS.
10. Control using the MyJABLOTRON application from tablets, smart phones or from a website.
11. Editing user codes by the user via the keypad and via J-Link SW.
Don´t forget to offer annual system checking to your customer. It is very useful to check the system functions
periodically, not only the control panel but also all installed devices. The technician creates a report about
the annual check performance and this can serve the insurance company. The annual check being due
can be indicated to the customer automatically by an LCD keypad.