jablotron JA-101K, Руководство пользователя, Страница: 11 / 110

JABLOTRON
ALARMS
a.s.
Pod
Skalkou
4567/33
46601
Jablonec
n.
Nisou
Czech
Republic
www
.jablotron.com
||
|
JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels
11 / 110 MLJ51410
the settings. Almost all maintenance steps are required to be done by a service technician during the annual
system check.
The main backup battery is tested periodically a few times per minute by the control panel using a load test.
Wireless device batteries (in detectors, keypads, sirens, remote controllers) are automatically tested with every
link test transmission. The system reports a low battery from every enrolled device from the moment when it
appears until its replacement via a pre-set SMS report and simultaneously on the LCD keypad. Replacement of
the batteries can only be performed by a service technician. When a battery is removed it is necessary to wait a
few moments (20 sec) for discharging any internal capacitors and then insert a new battery.
Overview of recommended maintenance / function control:
Device type Description
Who does
the action Frequency
of the action
Fire detectors
Test of functions; inform the ARC agency
before you proceed!
Administrator Once per month
Clean up the dust and dirt. Administrator Twice per year
Battery check (BUS and wireless devices) Service technician Once per year
Panic buttons
Test of functions; inform the ARC agency
before you proceed!
Administrator Once per month
Battery check, measuring the voltage,
physical state.
Service technician Once per year
Detectors
Clean up the dust and dirt. Administrator Once per year
Test of functions; test of RF range for
wireless detectors. For detectors with a
built in camera test by taking a picture.
Service technician Once per year
Battery check, measuring the voltage of
every battery, physical state, etc.
Service technician Once per year
Keypads
Clean up the dust and dirt. Administrator Twice per year
Test every button, segments and RFID
sensor; test the RF range for wireless
keypads.
Service technician Once per year
Battery status check and their physical
state, measuring the voltage of every
battery, etc.
Service technician Once per year
Sirens
Clean up the dust and dirt, insects, check
water penetration to PCB, etc.
Service technician Once per year
Test of functions; test the RF range for
wireless sirens.
Service technician Once per year
Check batteries or backup batteries,
measuring, physical state, measuring the
voltage of every battery, etc…
Service technician Once per year
Remote controllers (RC)
Test of functions; RF range, low batt
indication check. Cleaning up or plastic
housing replacement.
Administrator or
Service technician
Once per year
Alarm state
Test of communication to ARC, voice calls
and SMS reporting. Administrator or
service technician
Once per year
Backup battery in the
control panel
Test during mains (AC) disconnection and
measuring the voltage of a backup battery
after 5 minutes of no mains power.
Service technician Once per year
Programmable outputs
(PG) Test of functions; RF range of wireless
modules
Service technician Once per year