Isuzu D-MAX 2020, Руководство владельца и водителя

Страница: 681 / 924

6-5
SERVICE AND MAINTENANCE
CAUTION
• Discarded parts, oil, grease and fluids could have an adverse effect on the
environment. It is difficult to dispose of these, so have your Isuzu Dealer handle
all checks and replacements.
• Oils, brake fluid, battery fluid and engine coolant have lubrication, cooling
and rust prevention functions. If these liquids deteriorate through loss or
contamination, it will cause a decline in the performance of the parts and such
problems as seizure or malfunctioning. Replenish or change these liquids when
performing the checks (daily and periodic checks) as required by the relevant
regulations or in accordance with the Maintenance Schedule (when either the
specified driving distance or period of time, whichever comes first, has expired).
WARNING (Continued)
• The engine, diesel particulate defuser (DPD), urea selective catalytic reduction
(SCR), muffler, exhaust pipe, radiator and power steering fluid reserve tank will
be hot immediately after the vehicle is driven. In addition, the oil and fluids will
also be hot. Be careful around these parts to prevent burns. Perform all checks
when the engine is cold.
• Do not perform work near an open flame or other heat sources.
• When working on the fuel line or fuel filter, remove the fuel tank filler cap. The
fuel system is under pressure and the fuel will overspill unless the pressure is
relieved, possibly leading to combustion or a fire.
• Do not let the engine run in poorly ventilated garages or sheds. This could cause
carbon monoxide poisoning, resulting in death.
• Hands, tools, or clothing could become entangled in the belts while the
engine is in operation. Do not allow them to come close to the engine (remove
wristwatches, neckties, rings, etc.).
• Fuel and batteries generate flammable gas that could explode. Do not use fire
and avoid creating sparks.
• Protect your eyes with protective goggles from oil, fluids, and falling objects.
• Use only Isuzu genuine parts for replacement parts.
• Do not leave tools used for inspection, removed parts, cloths used for cleaning,
etc. in the engine compartment. They could cause a malfunction if caught in
the moving components, such as belts, or they could cause a fire if they touch
components that become very hot.
5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 5 2020/11/05 11:54:07