Isuzu D-MAX 2020, Руководство владельца и водителя

Страница: 578 / 924

4-302
CONTROLS AND INSTRUMENTS
Lane Departure Prevention (LDP)
The lane departure prevention (LDP) is a system that supports avoiding deviation
from the lane by assisting the steering wheel operation when your vehicle is about to
deviate from the lane. If the system detects the lane with the stereo camera while you
are driving and determines that your vehicle may deviate from the lane, it assists the
driver's steering wheel operation. At the same time, it notifies the driver of the danger
by the MID display and steering wheel vibration. Use it on a well-maintained roads with
lanes, such as expressways and controlled-access highways.
WARNING
• The driver is responsible for safe driving. Always check the surrounding area
yourself to be safe when driving the vehicle.
• Do not rely entirely on the LDP. The LDP is not an autonomous driving system.
The system does not operate in all situations. Relying only on the system to
keep the vehicle in the lane may lead to an accident, such as a collision with
an obstacle on the side of the lane or a vehicle driving in the adjacent lane. The
system does not allow you to drive while looking aside or to drive without your
hands on the steering wheel, etc. Be sure to grip the steering wheel while driving
the vehicle.
• If the amount and timing of the system's controls differ from your feeling of
driving operations, do not use the system because it cannot support driving
safely.
• Do not perform the operation test of the system by yourself.
• If the stereo camera cannot detect an object (lanes) or if the stereo camera
temporarily stops or malfunctions, the LDP does not operate.
• Do not use the system in the following situations.
- When emergency repairs using a puncture repair kit have been done
- When tire chains are installed
- When the vehicle drives unstably due to a traffic accident or malfunction
- When the brake system warning light is on
- When towing a vehicle, etc.
WARNING (Continued)
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 302 2020/11/12 15:29:11