Isuzu D-MAX 2020, Руководство владельца и водителя

Страница: 576 / 924

4-300
CONTROLS AND INSTRUMENTS
Automatic Stop of Warning
If the following operations are performed, the LDW automatically stops the warning.
After the operations are performed, the LDW automatically reactivates.
• When the system cannot detect the lane
• When the vehicle speed is less than approximately 60 km/h (37 MPH)
• When driving on a sharp curve
• When driving on a curve at an inappropriate speed
• When turning the steering wheel sharply
• When braking
• When accelerating suddenly
• When the vehicle has not returned to the inside of the lane after the LDW is
activated
• When the lane is narrow
• When it is difficult for the stereo camera to recognize the lanes due to the
performance of its lane recognition function
• When lane markings do not exist or are fading
• When lane markings are difficult to distinguish because their color is similar to
that of the road surface
• When the width of the lane markings is narrow
• In the following cases, the lane may be incorrectly recognized, and the LDW may
be activated.
- When there is a tire mark, etc. on a wet road or snowy road
- When there is a boundary between snow and asphalt, a road repair mark, etc.
- When there is a shadow of a guardrail, etc.
- When the lane markings are drawn twice
- When lines other than the lane markings are drawn on the road surface
• When operating the turn signal indicator lights
When the LDW Is Unavailable
If there is a problem with the LDW, the
LDW OFF indicator light comes on. At this
time, the LDW does not operate.
If there is a problem with the stereo
camera, the LDW cannot be used.
Stereo Camera → Refer to page 4-221
LDW OFF indicator light
RTUL00SH002901
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 300 2020/11/12 15:29:11