Isuzu D-MAX 2020, Руководство владельца и водителя

Страница: 484 / 924

4-208
CONTROLS AND INSTRUMENTS
Parking Aid System
The parking aid system is a system that assists the driver to park the vehicle. This
system uses ultrasonic sensors to detect obstacles around the vehicle and informs the
driver of the presence of obstacles by displays on the MID and a buzzer.
WARNING
• The driver is responsible for safe driving. Always visually check the surrounding
area to be safe when driving the vehicle.
• The parking aid system is a system that assists the driver to park the vehicle. To
rely entirely on the system may cause a serious accident. Because the system
may not operate depending on the situation, always visually check the rear and
surrounding area to be safe when parking the vehicle.
• The sensors may not detect or may find it difficult to detect the following objects.
- Pedestrians
- Moving objects such as vehicles and animals
- Objects directly below the bumper
- Thin or low objects
- Stringy objects, such as wires, fence, and ropes
- Objects made of materials that are likely to absorb sound, such as snow,
clothes, and sponges
- Sharp objects
- Objects with angled surfaces
- Objects in high places, such as suspended objects
- Objects that already existed near the sensor before the system was started
• In the following situations, the detection function of the sensors may be reduced
and the system may not operate properly.
- When the temperature around the sensors becomes extremely high or low.
- When weather conditions are bad.
- When a large amount of water splashes over the sensors due to heavy rain or
other such situations.
- When the sensors are exposed to water while driving on a flooded road.
- When the vehicle is steeply inclined.
- When objects or walls are close to the vehicle, such as when the vehicle is in
a narrow tunnel, on a narrow bridge or narrow road, or in a small garage.
- When driving on a steep slope.
- When there is a steep slope in the direction the vehicle is moving.
WARNING (Continued)
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 208 2020/11/12 15:29:02