Isuzu D-MAX 2020, Руководство владельца и водителя

Страница: 913 / 924

8-37
MAIN DATA
RF-transmitting Equipment
[Mounting of RF-transmitting equipment]
1. Location of a RF-transmitting equipment should be selected that provides a solid
mounting point which does not interfere with the vehicle operator controls and
provides adequate ventilation.
2. RF-transmitting equipment shall not be able to be damaged or its ventilation
restricted. Special care should be taken to ensure that RF-transmitting equipment
can not be damaged by ingress of water.
3. Access to vehicle equipment in the load storage area shall not be barred, e.g. by
wheel jack, fire extinguishers or spare wheel.
4. The connections to the RF-transmitting equipment should be easily accessible in
order that the equipment may be removed for operation in transportable mode, or
for repairs and servicing.
5. It shall not hinder the operation of airbags or other safety equipment.
NOTE
• Great care should be taken not to mount any RF-transmitting equipment,
microphones or any other item in the deployment path of a Supplemental
Inflatable Restraint or "Air Bag."
[Routing of RF-transmitting equipment's cables]
1. Where possible, all cables should pass inside or underneath trim and through
moldings in such a way as to afford maximum protection. If necessary, use
sleeving, a proprietary protector and/or cable ties where required.
2. Select a route for the cable, ideally on the opposite side of the vehicle to the
fuel pipe, clear of brake pipes, cables, controls, vehicle wiring and any hot
components. Under no circumstances shall any cables be attached to the
foregoing.
3. Cable shall be routed so that they avoid
• sharp edges,
• continual bending,
• stress or strain,
• abrasion,
• extreme temperature, and
• becoming a hazard to the occupants of the car.
5108428_sec08_MAIN DATA.indd 37 2020/11/20 15:36:36