Isuzu D-MAX 2020, Руководство владельца и водителя

Страница: 410 / 924

4-134
CONTROLS AND INSTRUMENTS
RTUL40SH006101
Rain and light sensor
NOTE
• Do not put stickers or labels etc.
on the windshield in such a way
that they cover the rain and light
sensor. Otherwise, the sensor will
not be able to accurately sense
rain. The sensor is at the top of the
windshield.
• Do not replace the windshield with
anything other than a genuine Isuzu
windshield. Replacing the windshield
with anything other than a genuine
Isuzu windshield may prevent the
rain and light sensor from being able
to accurately sense rain. To replace
the windshield, contact the nearest
Isuzu Dealer.
• Do not use any water repellent
coating agents on the windshield.
Otherwise, the rain and light sensor
may not be able to accurately sense
rain.
• Replace the wiper blades if any
poorly wiped areas are found
when inspecting the operating
condition of the wiper. If there are
any poorly wiped areas, the rain
and light sensor may not be able to
accurately sense rain.
• If an abnormality occurs in the rain
and light sensor and the windshield
wiper switch is set to the "AUTO"
position, the wipers start operating
even when it is not raining. In this
case, contact the nearest Isuzu
Dealer.
• When the temperature of the rain
and light sensor is extremely high or
low, the automatic windshield wiper
may not operate properly.
NOTE (Continued)
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 134 2020/11/09 14:07:05