Isuzu D-MAX 2020, Руководство владельца и водителя

Страница: 181 / 924

3-31
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
Keyless Entry System
→ Refer to page 3-13
NOTE (Continued)
• The function does not operate in the following cases:
- One of the doors is open.
- The power mode is in a mode other than "OFF" in models with passive entry
and start system.
- The key is inserted in the starter switch in models with keyless entry system.
• Repeatedly locking and unlocking the doors using the remote control unit in
succession may trigger the protection circuit in the system, preventing the
unit from working. If this happens, wait for a while. The system will then work
normally.
• When leaving the vehicle, be sure to check that the doors are locked.
• If the function fails to operate normally, lock and unlock the doors using the key
and have the system inspected by your Isuzu Dealer.
Using the Key
Turn the key toward the front of the vehicle
to lock the door and turn it toward the rear
of the vehicle to unlock it.
NOTE
• Only the driver side door will lock/
unlock when the key is used to lock/
unlock the doors.
• In models with a passive entry and
start system, use the mechanical
key stored in the electronic key.
• After locking the doors, be sure to
check that they are locked by pulling
the door handles.
Passive Entry and Start System
→ Refer to page 3-20
RTUL30SH010001
Unlock
Lock
Key
5108428_sec03_PRE-DRIVING OPERATIONS.indd 31 2020/11/06 10:49:02