Intel® Server Board SE7520BD2 Technical Product Specification
BIOS Architecture
Revision 1.3
Intel Confidential
43
IDE Detect Time Out
(Sec)
0
5
10
15
20
25
30
35
Select the time out value for
detecting ATA/ATAPI device(s).
Primarily used with older IDE
devices with longer spin up times.
ATA(PI) 80Pin Cable
Detection
Host & Device
Host
Device
Select the mechanism for
detecting 80Pin ATA(PI) Cable.
The 80 pin cable is required for
UDMA-66 and above. BIOS
detects the cable by querying the
host and/or device.
Table 15. Mixed P-ATA-S-ATA Configuration with only Primary P-ATA
Feature
Options
Help Text
Description
First ATA Channel
P-ATA M-S
S-ATA M-S
Configures the first ATA channel for use by P-ATA
or ATAPI devices in master & slave modes, or by
a S-ATA device in present Master/Slave
combination.
Defines the S-ATA
device for this channel.
Second ATA
Channel
S-ATA M-S
None
Show the second ATA channel configuration The
channel will be shown as
None
if the S-ATA_M-S
ports have already been assigned to first channel.
Display only. If the
first channel selects P-
ATA, it reverts to S-
ATA M-S.
Table 16. BIOS Setup, IDE Device Configuration Sub-menu Selections
Feature
Options
Help Text
Description
Primary/Secondary/Third/Fourth IDE Master/Slave
Device N/A
N/A
Display
detected
device
info
Vendor
N/A
N/A.
Display IDE device vendor.
Size
N/A
N/A
Display IDE DISK size.
LBA Mode
N/A
N/A
Display LBA Mode
Block Mode
N/A
N/A
Display Block Mode
PIO Mode
N/A
N/A
Display PIO Mode
Async DMA
N/A
N/A
Display Async DMA mode
Ultra DMA
N/A
N/A
Display Ultra DMA mode.
S.M.A.R.T. N/A N/A
Display
S.M.A.R.T.
support.
Type
Not Installed
Auto
CDROM
ARMD
Select the type of device connected
to the system.
The Auto setting should work in
most cases.
LBA/Large Mode
Disabled
Auto
Disabled: Disables LBA Mode.
Auto: Enabled LBA Mode if the
device supports it and the device is
not already formatted with LBA
Mode disabled.
The Auto setting should work in
most cases.