manualshive.com logo in svg

Intel SE7520BD2, Технические характеристики продукции, Страница: 2 / 179

Поделиться
Скачать
Intel SE7520BD2 Скачать руководство пользователя страница 2

Revision History 

Intel® Server Board SE7520BD2 Technical Product Specifictation 

ii  

Revision 

1.3 

 

 

Revision History 

Date  

Revision 

Number 

Modifications 

10/29/2003 

0.4 

First draft for internal review 

12/10/2003 

0.5 

Conversion from Generic HW spec to the Intel® Server Board SE7520BD2 
specific spec 

02/09/2004 

0.75 

Updated NIC components, mixed processor support, SCSI mirroring support, 
and CMOS clear. 

03/31/2004 

1.0 

Correct DIMM SMbus address 

Updated BIOS setup menu 

Updated Error reporting & handling 

Updated Board Jumper Blocks 

06/14/2004 1.1 

Updated 

Block 

Diagrams 

11/15/2004 

1.2 

Updated serveral references and specified details.  Added MTBF data.  
Removed incorrect references to PXH-D.  Added details on the SE7520BD2-V 
SKU.  Added schemated for the SE7520BD2-V SKU.  Added EM64T data.  
Added mBMC sensors table. Updated Block Diagrams and Power Budget. 

02/07/2005 

1.3 

Added FAN pin outs. Updated BIOS menus. Added motherboard identification 
section. Added current errata as Appedix A.  

 

Disclaimers 

Information in this document is provided in connection with Intel

®

 products. No license, express or implied, by estoppel or otherwise, 

to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such 
products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of 
Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any 
patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining 
applications. Intel may make changes to specifications and product descriptions at any time, without notice. 

Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel 
reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future 
changes to them. 

This document contains information on products in the design phase of development. Do not finalize a design with this information. 
Revised information will be published when the product is available. Verify with your local sales office that you have the latest 
datasheet before finalizing a design. 

The Intel® Server Board SE7520BD2 may contain design defects or errors known as errata which may cause the product to deviate 
from published specifications. Current characterized errata are available on request. 

This document and the software described in it is furnished under license and may only be used or copied in accordance with the 
terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and 
should not be construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors 
or inaccuracies that may appear in this document or any software that may be provided in association with this document.  

Intel Corporation server baseboards contain a number of high-density VSLI and power delivery components, which need adequate 
airflow to cool.  Intel ensures through its own chassis development and testing that when Intel server building blocks are used 
together, the fully integrated system will meet the intended thermal requirements of these components. It is the responsibility of the 
system integrator that chooses not to use Intel developed server building blocks to consult vendor datasheets and operating 
parameters to determine the amount of air flow required for their specific application and environmental conditions.  Intel 
Corporation cannot be held responsible, if components fail or the server board does not operate correctly when used outside any of 
their published operating or non-operating limits. 

Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any 
form or by any means without the express written consent of Intel Corporation.  

Intel, Pentium, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation.  

*Other brands and names may be claimed as the property of others.  Copyright © Intel Corporation 2003-2005.  

Содержание SE7520BD2




















































































































































































Отзывы:

Нет отзывов