Infors HT Ecotron, Руководство по эксплуатации

Страница: 17 / 93

Ecotron - Incubation Shaker
Safety and Responsibility
03 May 2018 Page 15 of 90
2.6.1 Electrical Current
The equipment is operated electronically. There is an immediate
risk of fatal injury if contact is made with live parts.
The following points must be observed in order to avoid the risk of
fatal injury:

In case of damage to insulation, disconnect the equipment
from the power supply immediately and arrange for it to be
repaired.

Disconnect the unit from the mains before commencing any
work on the electrical system.

Always use qualified electricians for any work on the electrical
system.

Disconnect the equipment from the mains before beginning
any maintenance, cleaning or repair work.

Do not bypass any fuses or take them out of operation.

When replacing fuses, ensure they have the correct number of
Amperes.

If the power cable is defective, replace it with a power cable of
the same type.

Keep moisture away from live parts. It may lead to a short cir-
cuit.

Never remove covers from the casing.
2.6.2 Danger due to Moving Parts
Moving parts are a general dangers posed by the equipment be-
cause body parts can be pinched or scratched when one is not
careful.
However, there is no danger that clothing or body parts can be
pulled into the equipment due orbital movement of the table.
The danger that fingers are pinched has been minimised by means
of a sufficient distance between the tray and the casing and a stop
mechanism that stops the shaker drive when the door is opened.
Nonetheless, the cultivation flasks must only be moved when the
table has come to a complete standstill.