Infors HT Ecotron, Руководство по эксплуатации

Страница: 25 / 93

Ecotron - Incubation Shaker
Setup and Function
03 May 2018 Page 23 of 90
Drip tray
To collect any leaked liquids in case of a flask breakage, the equip-
ment features a drip tray (1) underneath the table. To clean the
drip tray, the four hexagonal socket screws of the table can be
loosened and the table can be removed (see chapter 12.4.1 "Maxi-
mum Permissible Setpoints for the Rotation Speed", page 85).
Operation
The shaker drive is operated using the “Rotation speed” parameter
( RPM , Rotations Per Minute). For an exact description of how to
set the parameters see chapter 7.4 "Adjusting, Activating and De-
activating Parameters", page 56.
INFORMATION
The load weights must be within the permissible range. If the
load is too light or too heavy, this will prevent the table from run-
ning smoothly, leading to increased wear.
The permissible load weights depend on the position of the
equipment in the stack and the shaking speed (see chapter
7.2.5 "Notices on Loading the Table", page 53).