Infors HT Ecotron, Руководство по эксплуатации

Страница: 57 / 93

Ecotron - Incubation Shaker
Operation
03 May 2018 Page 55 of 90
View boxes
The current actual values, setpoints, alarm messages and error
messages are displayed on one or both of the LED displays using
three-letter abbreviations.

During normal operation, the current actual value for the “Ro-
tation speed” (RPM) parameter is displayed in the left view
box whenever this parameter is active. Otherwise, the display
alternates between the entered setpoint and the OFF mes-
sage.

During normal operation, the current actual value for the
“Temperature” (°C) parameter is displayed in the right view
box whenever this parameter is active. Otherwise, the display
alternates between the entered setpoint and the OFF mes-
sage.
In addition to the actual values/setpoints or the
ON and OFF mes-
sages, the following messages can be displayed:
Current actual value of the temperature is too low compared to set-
point (deviation of -1.5°C).
Current actual value of the temperature is too high compared to
setpoint (deviation of +1.5°C).
The equipment door is open.