IBM TransNote, Руководство пользователя

Страница: 40 / 152

34
Chapter 2
To modify an action:
Do not change the name of
the existing actions, such
as Keyword, To Do,
Message, or Copy. Doing
so causes unpredictable
behavior when identifying
actions.
1. For programmers developing custom applications, to create
an action, type the name in the Enter Name box. Then in the
Choose Type box, select the ink type. The action type will
appear in the Action selector on the digital notepad, but not in
Ink Manager Pro.
2. To change the selection method, select the action, and then in
the Selection Mode area, click the method you want to use
when marking ink on the digital notepad, Circle or TwoTap.
3. To change the upload speed, de-select the Immediate Upload?
checkbox. If not checked, the marked words transfer at the
rate determined by the Upload Policy (see the Inking tab, in
this section).
4. Click Update to change the settings in the list. When you click
OK or Apply, the change transfers to the digital notepad.
The functions to remove or create new action types are meant
only for programmers who are developing custom applications.
General users should NOT use them.
Enabling Keyword transcription
Ink Manager Pro can automatically transcribe the words and
phrases you mark as keywords into text words (up to 100
characters). You must enable the option before the engine
transcribes your keywords. To do this, follow these steps:
1. Open the Preferences menu (File > Preferences), and select
the Actions tab, described earlier in this chapter.
2. Select (check) the Transcribe checkbox to enable keyword
transcription.
3. Note the number of transcription alternates. Alternate words
appear when you verify Keywords in a list, or when you mark
keywords in Ink Manager Pro. This setting controls the
number of alternative words the program provides. Select
from 1 to 10. Adjust the setting to increase or reduce the
number if desired. Remember that increasing the number
might require more computer resources. Also, if you prefer,