manualshive.com logo in svg

IBM P260, Инструкция по установке и обслуживанию

Samsung P260 - Инструкция по настройке программного обеспечения для устройства доступна для бесплатного скачивания на manualshive.com. Этот руководство поможет вам установить и настроить программное обеспечение на вашем устройстве для максимальной эффективности. Будьте уверены, что вы сможете использовать ваш Samsung P260 на полную мощность.

Поделиться
Скачать
background image

Before you begin

Attention:

Replacing the management card and the system-board at the same time might result in the

loss of vital product data (VPD) and information about the number of active processor cores. If the
management card and system-board must both be replaced, replace them one at a time. For further
assistance, contact your next level of support.

About this task

Note:

For more information about the locations of the connectors and LEDs on the system-board, see

“System-board layouts” on page 13.

To replace the system-board and chassis assembly, complete the following steps:

Procedure

1.

Read the Safety topic and the “Installation guidelines” on page 35.

2.

Is the compute node managed by a management console?

Yes

Continue with step 3.

No

Continue with step 5 on page 85.

3.

If the compute node has Virtual I/O Server (VIOS) installed or uses more than one partition, have
the customer back up partition profile data by using one of the following methods:

v

If this system is managed by an IBM Flex System Manager (FSM) management console, back up
partition profile data. Using the Systems management command-line interface (SMCLI), enter the
bkprofdata

command. See smcli - Systems management command-line interface

(http://pic.dhe.ibm.com/infocenter/flexsys/information/topic/com.ibm.acc.8731.doc/
com.ibm.director.cli.helps.doc/fqm0_r_cli_smcli.html). For more information about the bkprofdata
command, see BKPROFDATA (http://publib.boulder.ibm.com/infocenter/flexsys/information/
topic/com.ibm.acc.psm.reference.doc/manpages/psm.bkprofdata.html).

Note:

If the backup operation fails because the compute node is in an error state, save the

configuration files by using the log collection tool. See Collecting pedbg on Flex System Manager
(FSM) (https://www.ibm.com/support/docview.wss?uid=nas777a837116ee2fca8862578320079823c).

v

If this system is managed by an Hardware Management Console (HMC), back up the partition
profile data by using the HMC. See Backing up the partition profile data (http://
pic.dhe.ibm.com/infocenter/powersys/v3r1m5/topic/p7hbm/backupprofdata.htm).

Note:

If the backup fails because the compute node is in an error state, save the configuration files

by using the log collection tool. See Version 7 or 8 HMC: Collecting PEDBG from the HMC
(http://www.ibm.com/support/docview.wss?uid=nas8N1018878).

v

If this system is managed by an Integrated Virtualization Manager (IVM), back up the partition
profile data. Using the IVM command line, enter the bkprofdata command. For more information
about the bkprofdata command, see IVM bkprofdata command (http://pic.dhe.ibm.com/
infocenter/powersys/v3r1m5/topic/p7hcg/bkprofdata.htm).

If no backup data is available and the back-up partition profile data operation fails, the partition
details cannot be restored. The partitions must be rebuilt after hardware recovery.

Note:

Although the FSM and HMC management consoles automatically save partition profile data,

which is used for recovery in step 28 on page 88, the manual partition profile data backup that is
completed in step 3 is recommended as a precaution and best practice before you replace the
system-board.

84

Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide

Содержание P260













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для P260

LaCie 700 Series Quick Install Manual preview
700 Series
Бренд: LaCie Страницы: 16
Acer P186H Series Quick Setup Manual preview
P186H Series
Бренд: Acer Страницы: 2
NEC LCD1920NX BK - MultiSync - 19" LCD Monitor Specifications preview
LCD1920NX BK - MultiSync - 19" LCD Monitor
Бренд: NEC Страницы: 2
NEC FE991SB - MultiSync - 19" CRT Display User Manual preview
FE991SB - MultiSync - 19" CRT Display
Бренд: NEC Страницы: 17
NEC EA273WM-BK Specification preview
EA273WM-BK
Бренд: NEC Страницы: 2
NEC E222W - MultiSync - 22" LCD Monitor Setup Manual preview
E222W - MultiSync - 22" LCD Monitor
Бренд: NEC Страницы: 2
NEC AccuSync LCD71VM Service Manual preview
AccuSync LCD71VM
Бренд: NEC Страницы: 129
NEC AccuSync LCD4000 Dimensions preview
AccuSync LCD4000
Бренд: NEC Страницы: 2
NEC AccuSync LCD224WM Specifications preview
AccuSync LCD224WM
Бренд: NEC Страницы: 2
NEC AccuSync AS192 Specifications preview
AccuSync AS192
Бренд: NEC Страницы: 2
NEC AccuSync LCD73V Specification Sheet preview
AccuSync LCD73V
Бренд: NEC Страницы: 2
NEC LCD19WMGX - AccuSync - 19" LCD Monitor Release Note preview
LCD19WMGX - AccuSync - 19" LCD Monitor
Бренд: NEC Страницы: 3
NEC ESERIES Quick Manual preview
ESERIES
Бренд: NEC Страницы: 2
NEC AccuSync 120 Brochure preview
AccuSync 120
Бренд: NEC Страницы: 4
babymoov Yoo-Travel Instructions For Use preview
Yoo-Travel
Бренд: babymoov Страницы: 2
babymoov Premium Care Instructions For Use Manual preview
Premium Care
Бренд: babymoov Страницы: 40
NEC MultiSync LCD2180WG-LED User Manual preview
MultiSync LCD2180WG-LED
Бренд: NEC Страницы: 18
Radiforce RX440 Instructions For Use Manual preview
RX440
Бренд: Radiforce Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды