IBM P260 Скачать руководство пользователя страница 154

Страница: 154 / 524

AA060011

Explanation:

The firmware did not find an operating system image and at least one hard disk in the boot list was

not detected by the firmware. The firmware is retrying the entries in the boot list.

Response:

This might occur if a disk enclosure that contains the boot disk is not fully initialized or if the boot disk

belongs to another partition. Verify that:

The boot disk belongs to the partition from which you are trying to boot.

The boot list in the SMS menus is correct.

AA130013

Explanation:

Bootable media is missing from a USB CD-ROM

Response:

Verify that a bootable CD is properly inserted in the CD or DVD drive and retry the boot operation.

AA130014

Explanation:

The media in a USB CD-ROM has changed.

Response:

Retry the operation.

Check for server firmware updates; then, install the updates if available and retry the operation.

AA170210

Explanation:

Setenv/$setenv parameter error - the name contains a null character.

Response:

Go to Checkout procedure.

Replace the system-board, as described in Replacing the system-board and chassis assembly.

AA170211

Explanation:

Setenv/$setenv parameter error - the value contains a null character.

Response:

Go to Checkout procedure.

Replace the system-board, as described in Replacing the system-board and chassis assembly.

AA190001

Explanation:

The hypervisor function to get or set the time-of-day clock reported an error.

Response:

Use the operating system to set the system clock.

If the problem persists, check for server firmware updates.

Install any available updates and retry the operation.

AA060011 • AA190001

142

Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide

Содержание P260













































































































































































































































































































































































































































































































































Результаты поиска

Содержание P260

Отзывы:

Похожие инструкции для P260

Бренды по названию

Популярные бренды

IBM P260, Инструкция по установке и обслуживанию

Результаты поиска

Содержание P260

Отзывы:

Похожие инструкции для P260

Бренды по названию

Популярные бренды