IBM eServer xSeries 345 Type 8670, Руководство по обслуживанию, Страница: 99 / 176

Note: See “System” on page 116 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
001-XXX-001
(Failed core tests)
v System board
001-250-000
(Failed system board ECC)
v System board
001-250-001
(Failed system board ECC)
v System board
005-XXX-000
(Failed video test)
v System board
011-XXX-000
(Failed COM1 serial port test)
v
System board
011-XXX-001
(Failed COM2 serial port test)
v System board
014-XXX-000
(Failed parallel port test)
v System board
015-XXX-001
(USB interface not found, board damaged)
v System board
015-XXX-015
(Failed USB external loopback test)
1. Make sure the parallel port is not disabled.
2. Run the USB external loopback test again.
3. System board.
015-XXX-198
(USB device connected during USB test)
1. Remove USB devices from USB1 and USB2.
2. Run the USB external loopback test again.
3. System board.
020-XXX-000
(Failed PCI interface test)
v System board
020-XXX-001
(Failed hot-swap slot 1 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-XXX-002
(Failed Hot-swap slot 2 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-XXX-003
(Failed hot-swap slot 3 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
020-XXX-004
(Failed hot-swap slot 4 PCI latch test)
1. PCI hot-swap latch assembly
2. System board
030-XXX-000
(Failed internal SCSI interface test)
v System board
035-XXX-099
1. No adapters were found.
2. If adapter is installed re-check connection.
035-XXX-S99
(Failed RAID test on PCI slot S. S =
number of failing PCI slot. Check System
Error Log before replacing a FRU.)
1. Adapter
2. SCSI backplane
3. Cable
035-XXX-SNN
(Check System Error Log before replacing
a FRU.
s = number of failing PCI slot, nn =
SCSI ID of failing fixed disk.)
v Hard disk drive with SCSI ID nn on RAID adapter in PCI slot s .
Chapter 6. Symptom-to-FRU index
89