IBM eServer xSeries 345 Type 8670, Руководство по обслуживанию

Страница: 19 / 176

Chapter 2. Configuring your server
The following configuration programs are provided with your server:
v ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD provides software setup tools and
installation tools that are specifically designed for your IBM server. Use this CD
during the initial installation of your server to configure basic hardware features,
such as ServeRAID
™
and integrated RAID, and to simplify your network
operating system (NOS) installation. (See “Using the ServerGuide Setup and
Installation CD” for more information.)
v Configuration/Setup Utility
This program is part of the basic input/output system ( BIOS ) code that comes
with your server. You can use this program to configure serial port assignments,
change interrupt request (IRQ) settings, change the drive startup sequence, set
the date and time, and set passwords. You also can use this program to view the
system configuration settings, for example, the number of installed
microprocessors, the amount of installed memory, the BIOS diagnostics version
level, and so on. See “Using the Configuration/Setup Utility program” on page 11
for more information.
v ServeRAID programs
The ServeRAID programs come with your server. If your server has a ServeRAID
adapter installed or if you are using the RAID capabilities of the integrated SCSI
controller, you can use the ServeRAID Manager program to define and configure
your disk-array subsystem
before you install your operating system. See “Using
ServeRAID Manager” on page 13 for more information.
v LSI Logic Configuration Utility
With the built-in LSI Logic Configuration Utility program, you can configure the
integrated SCSI controller and the devices that attach to it. See “Using the LSI
Logic Configuration Utility program” on page 20.
v Integrated System Management
To update the Integrated System Management (ISM) firmware, see “Updating the
integrated system management firmware” on page 21 for more information.
v Ethernet controller configuration process
To configure the integrated Ethernet controller, see “Configuring the Ethernet
controller” on page 21.
v
IBM Director
IBM Director is a work-group-hardware-management tool that you can use to
centrally manage xSeries servers; IBM Netvista, IntelliStation
®
, and ThinkPad
®
computers; and non-IBM Intel-microprocessor-based systems. IBM Director
automates tasks such as inventory-taking, monitoring of environmental sensors
(such as temperature, voltage and fans), alerting, and system-health information.
For more information and instructions about IBM Director, see the IBM Director
User’s Guide on the CD that comes with your server.
Using the ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD includes an easy-to-use setup and
installation program that is specifically designed for your IBM server. The
ServerGuide program detects the server model and hardware options that are
installed and uses that information during setup to configure the hardware. The
© Copyright IBM Corp. 2002
9