IBM eServer xSeries 345 Type 8670, Руководство по обслуживанию, Страница: 24 / 176

When you run the ServeRAID Manager program from the startable IBM ServeRAID
Support CD, you are using Startable CD mode, in which you can configure your
controller before you install your operating system.
To run the ServeRAID Manager program in Startable CD mode, turn on the server;
then, insert the
IBM ServeRAID Support CD into the CD-ROM drive. If the
ServeRAID Manager program detects an unconfigured controller and ready drives,
the program automatically starts the Configuration wizard, and a window similar to
that shown in Figure 1 opens.
Configuring the controller
You can use the Configuration wizard to configure your controller. The Configuration
wizard provides two configuration options: Express and Custom. Express
configuration automatically configures your controller, and you can use Custom
configuration to configure your controller manually.
Note: If the integrated RAID controller has two channels, it will appear in the
ServeRAID Manager tree as two controller objects. However, you can
configure only one array and one RAID level-1 logical drive.
Using Express configuration: Express configuration automatically configures
your controller, creates an array by grouping together the first two physical drives
that appear in the ServeRAID Manager tree, and it creates a RAID level-1 logical
drive.
Complete the following steps to use Express configuration:
1. In the ServeRAID Manager tree, click the controller.
2. Click Express configuration .
3. Click Next . The “Configuration summary” window opens.
Figure 1. “Configuration wizard” window
14
xSeries 345 Type 8670: Hardware Maintenance Manual and Troubleshooting Guide