FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
8 Commissioning Core Components
Issue 02 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
103
2.
On the VCN IVS home page, double-click
Add User
, create a user, and click
Next
. The
Assign Rights
page is displayed.
When creating a user, you can select
Enable account validity period
and set
Valid from
and
Valid to
to set the account validity period for the created user.
Figure 8-28
Creating a user
3.
Set
Multi-point logins
to a value greater than 2.
4.
In the
Assign Device View Rights
area, select the cameras to be browsed and queried by
the user. Set other parameters based on the documentation delivered with the equipment
or the documentation obtained by referring to the
Preparing Documentation
section,
and click
Finish
.
----End
8.4.4.1.3 Configuring Camera Parameters on the NetEco
This section describes how to configure video parameters on the Parameter Configuration
page.
Prerequisites
You have logged in to the NetEco client.
You have the video management permission.
Use a 32-bit or 64-bit Internet Explorer 11 browser to play videos.
The OCX control has been registered.
Procedure
Step 1
Choose
Monitor
>
Security
>
Camera Management
from the main menu. The
Camera
Management
window is displayed.
Step 2
In the navigation tree on the left, click
Parameter Configuration
. The
Parameter
Configuration
page is displayed.
Step 3
Specify parameters in the right pane based on
