FusionModule1000A40 Prefabricated All-in-One Data
Center
Commissioning Guide
8 Commissioning Core Components
Issue 02 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
94
Figure 8-20
Adding an ECC800 device to the modular
Click
OK
, and you can view the task information, including
Type
,
Device Name
,
Region
,
Progress
,
Status
,
Start Time
,
End Time
, and
Information
in the displayed
Progress
window.
After the ECC800 is bound to a modular, you can view the ECC800 in the corresponding modular on the
Data Center Planning
page, or configure
Management Info
and
Asset Information
for the device as
required.
On the
Data Center Planning
page, the layout, number of half-sized rack spaces in a row, and devices
of the modular can be synchronized with those on the ECC800 WebUI.
Step 4
Select the device icon, and configure parameters for the device in the right pane based on
actual conditions.
Names of devices connected through ECC800:
For devices that are synchronized to the NetEco through the ECC800 for the first time, their names
are different on the NetEco and web-based ECC800 client and are all the default names.
The modification of the device name on the ECC800 web client and the modification of the device
name on the NetEco are synchronized with each other.
Step 5
Click
in the upper area of the page to save device information.
After the ECC800 device is bound, select the ECC800 device in the left navigation tree. Then, change
the authentication password in the
Management Info
area so that the password on the ECC800 WebUI
is the same as that on the NetEco for the ECC800 to connect to the NetEco properly. The preset
authentication password for the ECC800 device is Modifyme_123.
Perform the following operations on the
Modify
page:
1.
Enter the new password in the
New password
and
Confirm password
text boxes.
2.
Perform the following operations as required in the
Send To Device
column.
If
YES
is selected, change and synchronize the authentication passwords for the ECC800 and
ECC800 WebUI synchronized on the server so that the authentication passwords on both sides are
the same.
If
NO
is selected, change the authentication password for the ECC800 synchronized on the server.
3.
Click
OK
.
You are advised to change the password once every three months.
