FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
6 Power-On Commissioning
Issue 10 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
265
5.
Click
Next
to complete the recording plan setting. When
is displayed in the status bar,
the recording plan has been set successfully.
6.
Click
Finish
.
Step 4
Create a user.
When connecting to the VCN on the NetEco, you need to log in to the VCN as a non-admin
user.
1.
Log in to the VCN IVS as user Admin.
2.
On the VCN IVS home page, double-click
Add User
, create a user, and click
Next
. The
Assign Rights
page is displayed.
When creating a user, you can select
Enable account validity period
and set
Valid from
and
Valid to
to set the account validity period for the created user.
Figure 6-22
Creating a user
3.
Set
Multi-point logins
to a value greater than 2.
4.
In the
Assign Device View Rights
area, select the cameras to be browsed and queried by
the user. Set other parameters based on the documentation delivered with the equipment
or the documentation obtained by referring to the
Preparing Documentation
section,
and click
Finish
.
----End
6.4 Power-On Commissioning for the Cooling System
6.4.1 Equipment Power-On
Prerequisites
Verify that the humidifier water inlet pipe and drainpipe are correctly connected, that the
thermal insulation foam is intact, and that refrigerant has been charged.
