FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
6 Power-On Commissioning
Issue 10 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
255
the IPC6325 camera automatically obtains an IP address that is in the same network
segment as the ECC800 IP address.
Before commissioning the IPC6325 camera, set the IP address for the IPC6325 camera
based on customer requirements.
Set the internal and external IP addresses as planned by the customer. The following IP
addresses are just examples.
Table 6-16
IP address plan
Device
Internal IP Address
External IP Address
Camera
Example: 192.168.248.50; range:
192.168.248.50–192.168.248.199
Camera external IP
address
VCN
Example: 192.168.248.55; range:
192.168.248.50–192.168.248.199
VCN external IP address
Procedure
Step 1
Set the IP address for the IPC6325 camera.
1.
Enter
https://192.168.248.10
in the address box of the browser and press
Enter
to access
the WebUI login page. After login, choose
System Settings
>
Video Management
.
2.
Under the
Search for Video Device IP Address
list, click
Search
.
Configure the camera IP address and the IP address of the LAN port on the ECC800 in the same
network segment.
The search timeout interval is 10s. If the search fails, a search failure message is displayed.
To avoid missing cameras, perform
Search
for multiple times.
Figure 6-11
Searching for the camera IP address
3.
Add the camera that has been found to
Video Information
. Click
Add
under the
Video
Information
list, and enter the camera information in the displayed
New Video
Information
window.
