Event IDs for Errors and Events
The system firmware generates event IDs for errors, events, and forward progress to the integrated
Lights Out 2 Management Processor (iLO 2 MP) through common shared memory. The iLO 2
MP interprets and stores event IDs. Reviewing these events helps you diagnose and troubleshoot
problems with the server.
Controls, Ports, and LEDs
This chapter provides a basic description of the controls, ports, and LEDs found on the front
panel and rear panel of the HP Integrity rx2660. For more information on LED functions and
descriptions, see
Chapter 5: “Troubleshooting” (page 106)
.
This chapter addresses the following topics:
•
“Front Panel Controls, Ports, and LEDs” (page 27)
•
“Rear Panel Controls, Ports, and LEDs” (page 31)
Front Panel Controls, Ports, and LEDs
The front panel of the server provides the controls, ports, and LEDs commonly used when the
server is operational.
Figure 1-5 (page 27)
shows the control, port, and LED locations on the server front panel.
Figure 1-5 Front Panel Controls, Ports, and LEDs
7
SAS disk drive LEDs
4
USB port
1
System Insight Display
LEDs
8
5
Office Friendly server label
Server status LEDs
2
DVD LED
6
Power button
3
VGA port
NOTE:
Figure 1-5 (page 27)
shows the Office Friendly server LEDs. The LEDs for the Data
Center server are the same. The only difference is the Data Center server does not have the Office
Server label on the bezel.
Table 1-1
lists the front panel controls.
Controls, Ports, and LEDs
27
