Bedienungsanleitung
Bedienungsanleitung
LAYOUT :
Die EX-6605E ist eine PCMCIA FireWire 1394 uns USB 2.0Karte mit je zwei externen
Ausgängen für den Anschluss von Peripheriegeräten mit FireWire 1394 oder USB 1.1
bis 2.0 Interface (z.B. Digital Kamera, Digital Aufnahmegerät, Scanner, Drucker , Exter-
ne FireWire Gehäuse für Festplatten usw.). Die EX-6605E ist eine Hard Plug & Play
FireWire PCMCIA BusCard. Die Einstellungen der I/O Adressen und Interrupts werden
vom SYSTEM-BIOS des Motherboards und beim installieren der Betriebssysteme Win-
dows 98SE, 2000, ME und XP vorgenommen. Die EX-6605E hat eine Datenübertra-
gungs-Rate bis 480Mbits pro Sekunde (51MB/Sek.). Sie unterstützt die OHCI Spezifika-
tionen (Open Host Controller Interface).
BESCHREIBUNG :
HARDWARE INSTALLATION :
Wenn Sie die EX-6605E installieren, beachten Sie die folgenden Installationshinweise.
Da es große Unterschiede bei Laptops gibt, können wir Ihnen nur eine generelle Anlei-
tung zum Einbau der EX-6605E geben. Bei Unklarheiten halten Sie sich bitte an die
Betriebsanleitung Ihres Computersystems.
Schalten Sie Ihren Rechner und alle angeschlossenen Peripheriegeräte aus und ziehen
Sie bei allen Geräten den Netzstecker aus. Schieben Sie die EX-6605E PCMCIA Karte
in eine freien Slot von Ihrem Portablen Computer ein. Fixieren Sie die EX-6605E ge-
mäss der Bedienungsanleitung Ihres Laptops. Stecken Sie das mitgelieferte FireWire
oder USB Kabel an die EX-6605E ein. Sie können nun wie in der nachfolgenden Zeich-
nung die verschiedenen FireWire oder USB Peripheriegeräte anschliessen.
EX
EX
EX
-
-
-
6605E
6605E
6605E
English
English
English
EX
EX
EX
-
-
-
6605E
6605E
6605E
English
English
English
WINDOWS 98/98SE INSTALLATION FOR FIREWIRE :
INSTALL IEEE 1394 HOST ADAPTER DRIVER:
When your Windows system boots up, it will find a new hardware on your system called
“
PCI FireWire (IEE 1394) Controller
”, you will be prompted to install a device driver. The
Installation Wizard will guide you to install the “
PCI OHCI compliant IEEE1394 Host
Controller
” drivers.
Click >
Next
< >
Search
< >
Next
< >
Next
<. Windows found the device driver in some
location (e.g. C:\WINDOWS\INF\1394.INF). Insert your Windows 98 CD into the CD-
ROM drive, click
“Next” and
>
Finish
<. Then restart Windows 98.
CHECK THE INSTALL DRIVER:
You can found in the Device Manager the following information about the EX-6605E.
Double click
“1394 Bus Controller”.
You should see the item
“PCI OHCI compliant
IEEE1394 Host Controller ”.
Check that no a yellow or red symbol beside the 1394 host
adapter entry.
TECHNICAL INFORMATION :
Compatibility:
- PCMCIA card for all Notebooks with CardBus controller
Operating system:
- WINDOWS 98/98SE/ME/2000 and XP
Chip:
- 1 x TI Texas Instruments and VIA
Connectors:
- 2 x FireWire 1394 6 pin and 4 pin
- 2 x USB 2.0
Extent of delivery:
- EX-6605E PCMCIA FireWire and USB 2.0 card
- 1 x 5V Power cable for USB or PS/2 ports
- 1 x Driver CD
- English manual
CE:
- EN50082-1 (IEC 801-2/801-3/801-4)
- EN50081-1 / EN 55022
WINDOWS 2000/XP INSTALLATION FOR FIREWIRE :
INSTALL IEEE 1394 HOST ADAPTER DRIVER:
When your Windows system boots up, it will find a new hardware on your system called
“
PCI FireWire (IEEE 1394) Controller
”, you will be prompted to install a device driver.
The Installation Wizard will guide you to install the „
Texas Instruments OHCI Compliant
IEEE 1394 Host Controller
“ drivers.
Click >
Next
< >
Search
< >
Next
< >
Next
<. Windows found the device driver in some
location (e.g. C:\WINDOWS\INF\1394.INF). If requested insert your Windows 2000 or XP
CD into the CD-ROM drive, click >
Next
< and
>
Finish
<. Then restart Windows 2000 or
XP.
CHECK THE INSTALL DRIVER:
You can found in the Device Manager the following information about the EX-6605E.
Double click
“1394 Bus Controller”.
You should see the item
“Texas Instruments
OHCI compliant IEEE1394 Host Controller ”.
Check that no a yellow or red symbol
beside the 1394 host adapter entry.
WINDOWS ME INSTALLATION FOR FIREWIRE :
INSTALL IEEE 1394 HOST ADAPTER DRIVER:
When your Windows system boots up, it will find a new hardware on your system called
“
PCI FireWire (IEEE 1394) Controller
”, you will be prompted to install a device driver.
The Installation Wizard will guide you to install the „
Texas Instruments OHCI Compliant
IEEE 1394 Host Controller
“ drivers.
Click >
Next
< >
Search
< >
Next
< >
Next
<. Windows found the device driver in some
location (e.g. C:\WINDOWS\INF\1394.INF). Insert your Windows ME CD into the CD-
ROM drive, click >
Next
< and
>
Finish
<. Restart Windows ME.
CHECK THE INSTALL DRIVER:
You can found in the Device Manager the following information about the EX-6605E.
Double click
“1394 Bus Controller”.
You should see the item
“Texas Instruments
OHCI compliant IEEE1394 Host Controller ”.
Check that no a yellow or red symbol
beside the 1394 host adapter entry.
ANSCHLUSSMÖGLICHKEITEN :
DV Kamera
3,5“ und 2,5“ Festplatten
CD-R/CD-RW/DVD
1 x FireWire 6 und 4 Pin
Anschlüsse für DV Kamera,
Scanner, Externe Festplatten usw.
CardBus Anschluss
in den Laptop
2 x USB 2.0 Anschlüsse für
DV Kamera, Scanner,
Externe Festplatten usw.
IEEE 1394
CardBus
PC
Fi USB
CardBus
FireWire 13
94
Fir
eW
ire
13
94
FireWire 1394
Drucker, Scanner,
Festplatten usw.
USB 2.0
WINDOWS 98SE / ME INSTALLATION FOR USB 2.0 :
Go to the Device Manager from your Operating System. Now you have following
information in the Device manager:
Windows 98SE/ME
VIA USB Open Host Controller
VIA USB Open Host Controller
PCI USB 2.0 Host Controller
USB 2.0 Root Hub Device
USB Stamm Hub
Windows XP
VIA PCI to USB Enhanced Host Controller
VIA PCI to USB Open Host Controller
VIA PCI to USB Open Host Controller
USB 2.0 Root HUB Device
USB Root-Hub
Windows 2000
VIA PCI to USB Open Host Controller
VIA PCI to USB Open Host Controller
PCI USB 2.0 Host Controller
USB 2.0 Root HUB Device
USB Root-Hub
The entry may be different if you use the microsoft drivers!
Datum : 20.04.05 / Vers. 3.0
6
5
WINDOWS XP INSTALLATION FOR USB 2.0 :
Please go to "Windows Update" (
http://windowsupdate.microsoft.com) to
Install Microsoft
USB 2.0 Host Controller Driver or Windows XP Service Pack 2.
If you don’t have the Service Packs, you must install the driver from the CD. Insert the
Driver CD in your CD-ROM drive for example D: and open the directory:
D:\Usb 2.0\VIA\USB2_Host_Drivers
Start the file
”Setup.exe“
and follow the on-screen instructions to finish the installation.
Please restart your PC and put the card into the CardBus slot. Windows will recognize
and install the card automatically.
WINDOWS 2000 INSTALLATION FOR USB 2.0 :
Setup will install Microsoft USB 2.0 Host Controller Driver.
Installing Driver:
Open the
SETUP.EXE
program in the following folder of the driver CD supplied with your
USB2.0 card. For example
D:\Usb 2.0\VIA\USB2_Host_Drivers
Select
"Install"
button then it will install the "Microsoft USB 2.0 Host Controller Driver"
automatically on your Windows 2000 system. It will copy the driver to the system folder
and set the related registry tree.
Uninstalling Driver:
You could remove the "Microsoft USB 2.0 Host Controller Driver" by selecting the
"Uninstall"
button. It will completely remove the driver from the system.
Setup will install VIA USB 2.0 Host Controller Driver.
Installing Driver:
Open the
SETUP.EXE
program in the following folder of the driver CD supplied with the
your USB2.0 card for example
D:\Usb 2.0\VIA\USB2_Host_Drivers
Select
"Install"
button then it will install the "VIA USB 2.0 Host Controller Driver" auto-
matically on your Windows Me/98 system. It will copy the driver to the system folder and
set the related registry tree.
Uninstalling Driver:
You could remove the "VIA USB 2.0 Host Controller Driver" by selecting the
"Uninstall"
button. It will completely remove the driver from the system.
CHECK THE EX-6605 IN THE DEVICE MANAGER :
1
