2 Server Specifications
This chapter provides the specifications for the HP Integrity rx2660 server.
This chapter addresses the following topics:
•
“System Configuration” (page 36)
.
•
“Dimensions and Weight” (page 37)
•
“Grounding” (page 37)
.
•
“Electrical Specifications” (page 37)
.
•
“Physical and Environmental Specifications” (page 38)
For information on general computer room site preparation, see the HP Generalized Site Preparation
Guide on the HP website at
www.docs.hp.com
.
System Configuration
Table 2-1
lists the hardware specifications for the HP Integrity rx2660 server.
Table 2-1 Hardware Specifications
HP Integrity rx2660
Component
One or two Itanium single- or dual-core processors:
Processors
• 1.6 GHz/6 MB cache single-core processor
• 1.4 GHz/12 MB cache dual-core processor
• 1.6 GHz/18 MB cache dual-core processor
• 1.6 GHz/12 MB cache single-core processor
• 1.42 GHz/12 MB cache dual-core processor
• 1.67 GHz/18 MB cache dual-core processor
Supports up to eight Double Data Rate 2 (DDR2) DIMMs mounted on the system board.
Memory
Supported DIMM sizes are as follows:
• 512 MB
• 1 GB
• 2 GB
• 4 GB
• 8 GB
Minimum memory configuration is 1 GB (2 x 512-MB DIMMs).
Maximum memory configuration is 64 GB (8 x 8-GB DIMMs).
One to eight hot-pluggable SAS hard drives.
Disk drives
For the PCI-X I/O backplane assembly:
PCI slots
• One PCI-X slot @ 133 MHz
• Two PCI-X slots @ 266 MHz
For the PCIe/PCI-X I/O backplane assembly:
• One PCI-X slot @ 133 MHz
• Two PCIe slots @ PCIe x8
Eight port SAS core I/O card, or eight port SAS core I/O card with RAID expansion card.
SAS core I/O
Two GigE LAN ports.
LAN core I/O
Two serial ports, two USB 2.0 ports, one 10 Base-T/100 Base-T LAN port, and one optional
VGA port.
Management core I/O
36
Server Specifications
