![background image](http://html.mh-extra.com/html/hp/ab464-9003f/ab464-9003f_service-manual_164232241.webp)
10. Hold the bezel out from the chassis, and use the diagnostic panel light guide as a handle to
simultaneously push the board to the left to unplug it from the socket on the interconnect
board.
11. Slide the board toward the rear of the chassis until it stops against the guide pins.
NOTE:
Use the guide pins on the chassis and the L-shaped keyways on the display board
to help you with the display board removal procedure.
12. Tilt the board toward the front of the chassis, and lift it out at an angle.
13. Remove the diagnostic panel light guide by squeezing the plastic tabs until they disengage
from the slots on the board.
IMPORTANT:
Do not discard the diagnostic panel light guide. You must install it onto the
replacement display board.
Figure 82 Display Board Location
Removing and Replacing the Display Board
241