horsch 80910205, Руководство по эксплуатации

Страница: 96 / 218

9.10 Transport travels / notes on transport
Pay attention to the chapter "Safety notes" when performing transport travels.
Before starting transport travels check
o the correct connection of supply lines.
o the lighting system for damage, function and cleanliness,
o the brake and hydraulic system for obvious deficiencies.
o whether the parking brake has been fully released.
o the function of the brake system.
o the complete machine for picked up soil - clean the machine, if necessary.
WARNING
Danger of crushing, shearing, cutting, cutting off, being caught, wound up, pulled in and
impact by accidental movements of the machine.
• On foldable machines check the correct interlocking of the transport locks.
• Secure the machine against accidental movements before starting transport travels.
WARNING
Danger of crushing, cutting, being caught, being pulled in and impact due to insufficient
stability and tipping over.
• Drive in such a way, that you will at any time be able to securely control the Trac with trailer.
Be aware of your own abilities, account for the road, traffic, sight and weather conditions, the driving
characteristics of the Trac and the influences of a trailer.
WARNING
Danger of breakage during operation, insufficient stability and inadequate steering and brak -
ing ability of the Trac if used for purposes other than the ones it is intended for!
• These endangerments causes severe or even fatal injuries.
• Pay attention to the max. payload of the trailer and the permissible axle and tongue loads of the
Trac.
• Pay attention to the permissible total weight of the machine as well as the permissible axle and
tongue load.
• If necessary drive with the tank only partly filled.
WARNING
Danger of falling off the machine when riding on it without permission!
It is not allowed to ride on the machine as a passenger and/or to climb on machines in operation.
Expel persons from the loading place before you start to drive with the machine.
CAUTION
• Transport travels with the Trac control unit blocked are prohibited. For transport travels you
should always set the Trac control unit generally to neutral position.
• Use the transport lock to interlock the folded up spray boom in transport position to prevent
accidental unfolding.
• Use the transport lock to secure the swivelled up illuviation valve in transport position against
accidental swinging down.
• Use the transport position for the access ladder (swing the ladder up).
96