horsch 80910205, Руководство по эксплуатации

Страница: 145 / 218

Cleaning process:
1. Switch off the nozzles
2. Switch off the agitator
3. In the terminal switch over to fresh water.
Clear water now circulates through the nozzle pipe
into the tank. Please remember, that the wash that
is still in the wash container will thereby be diluted.
4. After approx. 5 seconds start to drive and switch on
the nozzles for approx.5 seconds (on a
non-treated remnant area).
5. Switch off the pump
In case of multiple nozzle systems all existing
nozzles must be opened for cleaning. There
is a risk of deposits if this instruction is not
followed!
13.5 Cleaning tank and
outside of sprayer
Inside tank cleaning
1. Set the suction side to fresh water (1)
2. Switch of boom circulation, injector and agitator (2)
3. Switch on the pump (on the terminal)
4. Switch off inside cleaning (3)
Outside cleaning via pressure port
1. Connect a cleaning hose to the 2“-Camlock
coupling (4) in the pressure line
2. Set the suction side to fresh water
3. Switch on boom circulation, switch off injector,
agitator and inside cleaning
4. Switch on the pump and adjust the required
pressure
5. Open the ball valve (5) and clean the crop protec-
tion sprayer
Outside cleaning using a high pressure cleaner
(optional)
1. Switch on the high pressure cleaner (6)
2. Clean the crop protection sprayer
4
5
1
3
2
6
145