horsch 80910205, Руководство по эксплуатации

Страница: 166 / 218

14.13 Axles
The oil in planetary gears and differential gears must be
changed at regular intervals.
All maintenance and repair works must
solely be carried out by expert person-
nel. Safety regulations must be strictly
complied with.
Remove all dirt from the steering knuckles once every
day. For this purpose steer once completely to the left
and the right. Park the machine and secure it against
accidental rolling.
Check the wheel hub bearing clearance (workshop work)
To check the wheel hub bearing clearance lift up the axle, until the tyres are off the ground. Release the brake.
Place a lever between tyre and ground and check the clearance.
In case of noticeable bearing clearance:
Adjust the bearing clearance
• Remove the dust cap or the hub cap.
• Remove the cotter pin from the axle nut.
• Tighten the wheel nut while turning the wheel, until the rotating wheel hub is slightly braked.
• Turn the axle nut back to the next possible cotter pin hole.
• Insert the cotter pin and bent it slightly open.
• Fill the dust cap slightly with grease and knock or screw it into the wheel hub.
Brake adjustment
Due to its function, the function and wear of the brake must be checked continuously and adjusted, if this should be
necessary. Resetting the brake is necessary, if approx. 2/3 of the max. cylinder stroke is utilized for flat-out braking.
For this purpose jack up the axle and secure it against accidental movement.
Drain the air vessel every day.
166