Honeywell Tuxedo Touch Скачать руководство пользователя

Страница: 9 / 64

About the System (cont'd)

“Panic”

Displays Emergency
functions (as
programmed by the
installer).

Note:

This icon is

displayed and active on
all screens except while
in the Clean Screen
mode, during an LCD
Display test in

Diagnostics

and from the

Video and Camera
screens.

"Message”

Record and retrieve
Voice Messages.

“Camera”

Press to access
camera settings.

“Event View”

Press to access video
recordings.

LED Operation

The Tuxedo has three LEDs as follows:

Screen Blackout

(EN50131 Display)

The Screen Blackout feature prevents unauthorized users from viewing the status of the Security System by returning to
the Home screen and turning off the Armed and Ready status LEDs.

When the EN50131 Display is turned ON:

•

The keypad returns to the "Home" screen after 30 seconds; "Armed" and "Ready" LEDs turn OFF.

•

The "To Homepage After" time setting changes to 30 seconds and the time is non-selectable.

•

The “Auto Slideshow After” is preset to “1” minute and cannot be changed.

•

The Security, Message and Lighting screen does not display system status until an authorized user code is
entered.

•

The "Setup" menu does not display system status until an authorized user code is entered.

•

Videos cannot be played.

Содержание Tuxedo Touch
































































Результаты поиска

Содержание Tuxedo Touch

Отзывы:

Похожие инструкции для Tuxedo Touch

Бренды по названию

Популярные бренды

Honeywell Tuxedo Touch, Руководство пользователя

Результаты поиска

Содержание Tuxedo Touch

Отзывы:

Похожие инструкции для Tuxedo Touch

Бренды по названию

Популярные бренды