Honeywell Tuxedo Touch, Руководство пользователя

Страница: 36 / 64

Using Z-Wave Devices and Scenes (cont'd)
32
Room Setup
A room is a defined collection of different types of Z-Wave devices, which can be used to organize a large number of Z-
Wave devices into smaller, more manageable device lists. Up to 50 rooms can be created with no limitation to the
number of devices in each room.
Room Name Kitchen Bedroom Living Room
Device 1 Kitchen Over Head
Light Bed. Lamp L.R. Lamp
Device 2 Kitchen Cabinet Lights Bed. Fan L.R. Fan
Device 3 Kitchen Fan Bed Overhead Light L.R. Outlet
Device 4 Kitchen
Follow the procedure below to create a Room.
1. Press Room Setup > Add .
2. Enter a room name > press GO .
3. Check the box next to the device(s) that you want
to be controlled in this Room and press Save .
4. Select Edit to make changes to existing
Rooms; use Delete to delete a Room.
5. If settings were changed, a pop-up confirmation
window displays
“Settings Saved.”
Secondary Tuxedo Controller
After all Z-Wave devices have been added into the
Primary Tuxedo (#1), the device information can be downloaded to a Secondary Tuxedo (#2). Up to 231 secondary’s plus
1 primary controller, for a total of 232. Keep Tuxedos within 40 feet of each other (if it does not work, move the keypad
closer to the primary), apply power to Tuxedo #2 and do the following:
1.
At Tuxedo #1 (Primary Controller): Press Automation > Z-Wave Setup ; the “Z-Wave Device Management”
screen is displayed.
NOTE: If used for Remote Services, Tuxedo should not be configured as a secondary controller. See the Remote
Services section later in this document.
2.
At Tuxedo #2 (Secondary Controller): Press Z-Wave Primary (located in the lower right side of the screen). The
icon changes to an icon, representing the controller is now in secondary mode.
NOTE : The message “Please remove all Z-wave devices from network first” appears if Z-Wave devices are
enrolled. If no Z-Wave devices exist, a confirmation will display “Change to Secondary Controller? Note: Total
Connect feature will be unavailable in secondary controller mode.” Select Yes to change this keypad to a
Secondary Controller.
3.
At Tuxedo #1, Press Add Device .
4.
At Tuxedo #2: Press Add Device . “Secondary Controller Inclusion Devices Upload in process.” When
device information from the Primary Tuxedo is downloaded to the Secondary Tuxedo:
Example 2: Screen Interface
Example 2: Assigning Devices