Honeywell Tuxedo Touch страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 64

background image

About the System (cont'd)

6

Messages

The Tuxedo can record voice messages for others on the premises. The number of messages is not limited; however, the
total time of all messages added together cannot exceed 120 seconds.

Note

: The voice messages are stored in the memory and a

ll messages are lost

if the keypad loses power or if it is reset.

Recording/Retrieving Messages

Press

Multimedia

and

Message

. Enter your Authorized code; the “Message Center” screen is displayed.

Press

RECORD

and record your message while staying within approximately one foot of the keypad and speaking at

a normal voice volume. As you are recording your message, the remaining time counter counts down to indicate the total
remaining time available and a “

Recording New Memo…

” message is displayed above the message list window.

Press

STOP

when you are done recording the message.

To listen to a voice message, highlight the message and then press

PLAY

. As the message is being played, a “

Play

(#): Voice Memo…

” message is displayed above the message list window. The Message LED continues to flash until all

new messages have been played back entirely. When the end of the message is reached, the playback stops.

To listen to the next message or previous message, press

NEXT

and

PREV

.

To delete the selected message, press

DELETE

. A confirmation window is displayed stating:

Selected Memo 2: 11/02/15 00:30:00

Select

Yes

or

No.

To delete all messages, press

DELETE ALL

. A confirmation window is displayed stating:

“Confirmation” Do you want to delete all messages?

Select

Yes

or

No.

To exit, press

Back

and

Home

.

Notes:

1. Each message is numbered, dated and the length of the message in seconds (Sec) is displayed on the message list.
2. Use the slide bar to raise and lower the message volume.

Operating Modes

Note

: This Operating Mode options are enabled in Central Station setup. The message “Code Declined – Try Again” is

not displayed if not enabled by the installer in Screen Security setup.

Automation (Occupancy) Mode

This mode is primarily used with the Scenes features to automate certain scene actions and does not communicate with
the control panel.

Note:

The Automation/Demo Mode option allows the automation and multi-media features to operate in a non-security

mode. When this option is selected, the keypad does not communicate with the control panel and any user can
select Advanced Setup screens.

Automation mode allows you to set Tuxedo in two conditions: Residential and Commercial. Scenes can be set to trigger
based on the status of these settings.

In Residential mode (default), the Arming options are:

Home

,

Away

, and

Night.

In Commercial mode, the Arming options are:

Open

,

Close

, and

Night.

«
...
8
9
10
11
12
...
»

Содержание Tuxedo Touch

































































Отзывы:

Нет отзывов

Похожие инструкции для Tuxedo Touch

Бренд: SwitchBot Страницы: 93

Бренд: HAI Страницы: 86

Бренд: Radio Shack Страницы: 7

Matrix 016-131-10

Бренд: Comm Net Systems Страницы: 9

Бренд: ABB Страницы: 76

sonnenBatterie eco

Бренд: Sonnen Страницы: 38

Leviton OmniTouch 7

Бренд: Epygi Страницы: 24

Бренд: TKB Home Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды