Honeywell Tuxedo Touch Скачать руководство пользователя | Manualshive

Страница: 55 / 64

background image

Remote Access (cont'd)

51

Local Access

Tuxedo’s remote access option offers built-in web hosting capability to access your system via any web enabled device.
The Tuxedo can connect to a network router via Ethernet cable (LAN network) or Wi-Fi depending on the installation
preference. The

Account Login

menu accesses the username and password require for accessing the home page, if

“Local Access Authentication.” Features of this page are as follows:

•

5 total users

•

Enabling or disabling authentication for local access

•

Secure web server access for remote connection (HTTPS)

Web Server IP Address Access

The Home screen reveals the connected IP address in the bottom left hand corner. Any device with a browser connected
to the same network as the Tuxedo can access the webserver. This does not require authentication (Username and
Password). If this authentication is desired, check the

Authentication for Web Server Local Access

in “Account Login”,

which can control who has access to connect. Unchecking the box leaves the Web Server open for anyone to connect.

Connecting the Tuxedo to a mobile device

To connect a mobile device to the Tuxedo, view the “Local System Control (Tablet/Smartphone)” training video, and then
do the following:

Smart Phone or Tablet

1. Verify the Tuxedo is connected to the Internet via Wi-Fi or its Ethernet connector.
2. Verify the Smart Phone or Tablet is connected to the same network as the Tuxedo Wi-Fi.
3. Open the browser and enter the IP Address on the keypad (described above).

On a Personal Computer (PC)

1. Verify the Tuxedo is connected to the Internet via Wi-Fi or its Ethernet connector.
2. Verify the PC is connected to the same network as the Tuxedo Wi-Fi.
3. Open the browser and enter the IP Address on the keypad (described above).

Remote Access Browser Commands

Access to basic arming commands is available if using a Smart Phone or Tablet browser. Full access to keypad options is
available if using a PC.

NOTES

:

•

If left inactive, the web connection will disconnect after 10 minutes.

•

If using an iPad, iPhone or PC browser with low bandwidth (PC Mode), switch to the mobile theme. To switch to the

mobile theme press

Switch Theme

in the lower left hand corner.

•

Not supported commands during remote or local access with a web browser in PC or Mobile Modes:

Security

Annunciate status

Multimedia

Message center

System troubles

Picture/slide show

Emergency icon

Camera 360 degree rotation

Event logs

Camera Wi-Fi settings

Show zones

Recording settings

«
...
53
54
55
56
57
...
»

Содержание Tuxedo Touch

































































Отзывы:

Нет отзывов

Похожие инструкции для Tuxedo Touch

Бренд: Smartwares Страницы: 3

Бренд: iEXERGY Страницы: 25

Бренд: Current Страницы: 20

Бренд: nest Страницы: 40

Бренд: Sharper Image Страницы: 4

Бренд: Bitron Home Страницы: 4

Бренд: FEB Страницы: 3

Бренд: Vimar Страницы: 2

Бренд: Geti Страницы: 6

Бренд: Carlett Страницы: 60

Icompel IC-RESERVA-10T

Бренд: Black Box Страницы: 20

Radiant WHRH10KIT

Бренд: LEGRAND Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды